Avaya 700217243 manual Upgrading 1600 DSL and 012E Module Firmware, Check the LEDs

Page 72

6 Maintaining Your System	Quick Reference Guide

11Tighten the screw on the lower front of the cover.

Upgrading 1600 DSL and 012E Module Firmware

PARTNER ACS Release 5.0 or later provides a firmware upgrade capability for the 1600 DLS and 012E modules which are equipped with programmable flash memory. The firmware to upgrade these modules can reside on either a Remote Access PC Card or on a Backup/Restore PC Card.

When configured for firmware upgrades, the Remote Access PC Card can contain system software as well as firmware upgrade software while the Backup/Restore PC Card contains just the firmware upgrade software.

The steps to perform a firmware upgrade are the same as those to upgrade the system software. See “Using a PC Card” on page 60.

Check the LEDs

While a 1600 DSL or 012E module is undergoing a firmware upgrade, the power LEDs appear as follows:

•The power LED on the 1600 DSL and/or the 012E module is initially steady green for 10 to 20 seconds, then flashes for another 5 to 10 seconds.

•The LED on the processor module flashes green while the firmware upgrade is in progress.

•The LEDs on other modules residing in the carrier that are not being upgraded are off.

Some modules do not display the LED off during a firmware upgrade of other modules. The power LED on the 1600 DSL module is steady green and the power LED on the PARTNER Messaging module is steady amber while firmware is upgraded on other modules.

62 Upgrading 1600 DSL and 012E Module Firmware

Image 72

Contents Partner Page Copyright Document Avaya Inc Obtaining Products Important Safety Instructions Page Wed like your opinion Page Contents Programming Telephone Features System Programming Flow ChartsMaintaining Your System If Something Doesn’t WorkWelcome System OverviewSystem Configurations System Capacity System ComponentsSystem Description Components Auxiliary Equipment OpreGetting Acquainted Installing Your System OverviewInstalling the Control Unit Evaluating the EnvironmentGo to the next procedure, Labeling Jacks, on Wall-Mounting a 5-Slot Carrier and Modules Labeling Jacks Grounding the System Inserting Batteries in the Processor ModuleQuick Reference Guide Initializing the System Checking the LEDs Connecting Lines and Extensions Installing the Cover Installing TelephonesConnecting Auxiliary Equipment Setting Up Your System System Programming BasicsSetting Up Your System Programming Overlays Button Locations Button Locations on Partner Telephones Programming Mode Changing Programming TypeUsing Centralized Telephone Programming Setting the Date, Day, and Time System Date #101System Day #102, Release 2.0 and Earlier System Time #103 Assigning Lines Automatic Daylight/Standard Times #126Customizing Extensions Copy Settings #399 Changing Settings to Support PBX or Centrex Services Recall SettingDialing Restrictions Emergency Phone Number List #406 Speed Dial and Auto Dial NumbersVoice Messaging Systems Programming for Voice Messaging SystemsSetting Up Your System Additional Voice Messaging System Programming Setting Up Your System Programming System Features System Speed DialDialing Restrictions and Permissions 5554757Allowed Phone Number Lists #407 Security AlertAllowed List Assignments #408 Disallowed Phone Number Lists #404 Line Access Restriction #302 Disallowed List Assignments #405Current restriction appears Outgoing Call Restriction #401 Groups of Extensions Group...DescriptionProgramming System Features Programming Telephone Features Automatic Line SelectionProgramming Telephone Features Extension Name Display Letters NumbersLine Ringing Quick Reference Guide Programming Telephone Features Maintaining Your System Backup and Restore Backup Programming-Automatic #123 Backup Programming-Manual #124 Restore Programming #125 Maintaining Your System Battery Replacement Using a PC Card Quick Reference Guide Upgrading 1600 DSL and 012E Module Firmware Check the LEDsAdding New Modules Maintaining Your System Replacing Modules Maintaining Your System Replacing Modules in a 5-Slot Carrier Maintaining Your System Changing System Settings Adding Lines, Pools, and ExtensionsChanging the System Clock Adding New Lines Key ExtensionsAdding New Pools Adding New ExtensionsSwapping Extensions If Something Doesn’t Work Your Release NumberClearing a Backup-Failure Alarm Press f00ss#123012E Module Power Management Telephone Problems Problem Check thisProblem Check this Calling Problems Telephone Doesn’t Work onProblem Check this System Problems DSL Module Problems ATMTip/Ring Device Problems System Programming Flow Chart-How to Use System Flow Chart-System System Flow Chart-System Speed Dial Numbers System Flow Chart-LinesSystem Flow Chart-Extensions Line Access Mode Copy SettingsCall Waiting Pool Extension AssignmentSystem Flow Chart-Dialing Restrictions and Permissions System Flow Chart-Groups System Flow Chart-Auxiliary Equipment Centralized Telephone Programming Flow Chart-How to Use To Program Another Feature at the Same ExtensionTo Change Setting for Another Extension To Erase a Feature or Auto Dial ButtonCentralized Telephone Programming Flow Chart For voice signaling the first available extension Manual SignalingTouch-Tone Enable Contact ClosureExtension Telephone Programming Flow Chart-How to Use Extension Telephone Programming Flow Chart Caller ID InspectGroup Hunting-Ring/Voice Signal Loudspeaker PagingRecord-A-Call