AltiGen comm AltiServ TM 4.5 manual Using Distribution Lists, Creating a Distribution List

Another way to listen to Feature Tips is by pressing #55 on your telephone. You can listen to just one tip at a time or listen to all the tips at once.

To turn this feature off, press 6 at the Personal Options menu. This is a toggle feature, so that if the feature is turned off, pressing 6 at the Personal Options menu will turn it back on again.

Using Distribution Lists

Distribution lists provide a way to use a single destination number to send messages to a group of people. You can send or forward a message to a list just as you would to an extension. When you send a message to a list, it is sent to everyone on the list.

You can create up to 100 distribution lists, and each list can have up to 64 entries. An entry can be an extension of any kind, including virtual or workgroup pilots, or another distribution list, so in effect there is no practical limit to the number of people to which you can send a single message.

When you create lists at your station, they are your personal distribution lists—every extension can have its own lists. There may also be system distribution lists created by your system administrators.

Creating a Distribution List

After pressing 4 at the Main Menu to hear the Personal Options menu, press 7 to access the Distribution Lists menu, then…

1.Press 1 to Add a distribution list.

2.When prompted, enter a 2-digit number to identify the list.

3.When prompted, enter the list members, which can be one of the following forms:

•Extension numbers.

•01, followed by a Personal Distribution List number.

•02, followed by a System Distribution List number.

4.The system reads back the entry to you, and you press # to save or * to cancel the entry.

5.Repeat the previous two steps until you’ve added all the list members.

36AltiServ User Guide