AT&T 1040 user manual Headset purchased separately

Page 17

Telephone operation

Basic phone operation

continued from previous page

Headset (purchased separately)

You can use this phone hands-free when you install any industry-standard two-band 2.5mm headset or other compatible, electronically isolated headset. The headsets must be purchased separately.

To make a call:

1.Press [HEADSET] (if a headset is connected to the telephone base).

2.Wait for a dial tone, then dial the number.

To answer a call, press [HEADSET].

To hang up, press [HEADSET].

Make sure the headset is plugged into the headset jack. You will hear a triple-beep if you press [HEADSET] when the headset is not plugged in.

NOTE: If SPEAKERPHONE is selected in the AUTOMATIC MODE menu (page 39 of the installation guide), pressing any line key will select the line and activate the speakerphone. If HEADSET is selected in the AUTOMATIC MODE menu and a headset is connected, pressing any [LINE] key will select the line and activate the headset.

11

Image 17
Contents User’s manual Canada, dial 1 866 On purchasing your new AT&T productStop 1040 Line small business system with speakerphone Table of contentsIntercom operation Iii Introduction Line Buttons Telephone overviewDo not Disturb TransferEnter VolumeHold Headset Conference MuteLCD contrast Display screen messagesInitializing Indicator lights Indicator lights & tonesOn when the Do Not Disturb function is on. on next LineAlert tones NEW MSGDirectory card Making and answering calls Lit line indicatorsBasic phone operation Speakerphone HandsetHeadset purchased separately Handset Ringer volume Volume controlHandset/speakerphone/headset volume Ringer type Ringer on/offL1 RINGER, L2 RINGER, L3 Ringer or L4 Ringer Do not Disturb Last number redial To delete a redial number Redial stackTo store a redial number in a one-touch key To exit, press Auto RedialPress Speaker Auto-redialPress Speaker or Headset Temporary tone dialing Call waitingHold Cancel call privacy Switching between linesRestore call privacy Call privacyTo talk privately with one party two-line conference only Conference callsTo drop one line To drop an extensionBlind transfer Call transferTransfer a call Answer a transferred call Transfer a call and speak to the receiving partyPress Transfer Conference Intercom overviewALL Make an intercom call with the handset IntercomMake an intercom call with the speakerphone or headset End an intercom or page call Answer an intercom callPress Intercom VoiceA specific extension single-phone Auto-mute on Answer a single-phone Auto-mute offPress Intercom then to show page ALL All system-widePage-all shortcut To end the page allAnswer a system-wide Room monitor One-touch overview Preference One touchProgram One-touch storageOne-touch storage If one-touch preference is set to Intercom To dial a one-touch numberTo delete a one-touch number To view or delete a one-touch numberTo view a one-touch number To modify a one-touch number To modify a one-touch number About forwarding to Dtad Forwarding to Dtad mailboxTo turn call forwarding on To set up call forwardingTo set call forwarding delay time Listening to messages internal access Glossary Time/date Answer a delayed ring Set ring delay durationCentrex operation Pick up another station’s lineConsole is OFF CSL Delay Ring is set to 16 seconds EXT 12 Console is OFF CSL Delay Ring is set to 20 secondsCentrex service call example EXT XX RingGeneral product care Important product information Especially about telephone answering systems Especially about corded telephonesProduct identifier and REN information FCC and Acta informationConnection and use with the nationwide telephone network Repair instructionsHearing aid compatibility Programming/testing of emergency numbersRights of the telephone company Part 15 of FCC rules How long is the limited warranty period? Limited warrantyWhat does this limited warranty cover? 800 222-3111 in Canada, please dial 1 866 How do you get warranty service?Other limitations Technical specification Case of difficulty Is no dial tone on this Appears to be dead onCase of difficulty Line connected to Line Case of difficulty Case of difficulty Case of difficulty Index Index