BT 106 manual Call barring, Creating a hotline number, Example Extension 12 barring is level

Page 14

Ultimate 106 – Edition 2 – Issue 3 - 24.12.02 – 5129

Call barring

You can stop calls, such as international or premium rate, being made from an extension.

To set call barring

Press keypad buttons in order shown

In program mode.

4Enter this code to start call barring.

Ext Enter the extension number you want to bar calls from (1 = 11, 2 = 12 etc.)

#To confirm.

Now choose the type of barring:

0No restrictions; all calls allowed.

1Allows speed dial numbers, 999, 112 and 144, numbers not beginning with 0 or 1.

2Allows speed dial numbers only, 999,

112 and 144.

3Allows 999, 112 and 144 only. Your Ultimate 106 announces, for

example: “Extension 12 barring is level 3”

Replace the handset back on the cradle.

Creating a hotline number

You can designate an extension telephone as a hotline. This means the telephone will automatically dial a pre-set number whenever the receiver is lifted. A hotline number overrides any call-barring restrictions that have been set.

For example, if the Ultimate 106 is installed in a bar, one extension can be set to dial a local taxi service. At home, you may want to provide children with a phone that will automatically call your work number.

To set a hotline number

In program mode.

5Enter code.

Ext Enter extension you want as a hotline (2-6). (Extension 1 cannot be used as a hotline.)

#1 To confirm.

Your Ultimate 106 announces, for

example: “Extension 12 is set for hotline”.

The hotline number that will be dialled must be stored as a speed dial number, location 50, see page 29 of this user guide to store speed dial numbers.

PLEASE NOTE

The following numbers can always be dialled,

whatever level of call barring you set: 999, 112, 144 emergency services and Chargecard calls.

14

Image 14

Contents User Guide UltimateFor your records Personal Emergency NumbersContents Introduction Unpacking your UltimateInstallation Wall mounting the Ultimate Extension numbersInstall the required number Extension sockets To connect up to 6 master extension socketsConnect the extension sockets to the Ultimate Remove the lower cover from the UltimateConnect the power cable Connect the telephone line cordSystem settings To make any system settingsMonday February 27th Time and date settingsTime is 3.15pm To set the timeTo set the ring delay Extension ring delay Day and night modesRing delay is 3 rings and day mode To select which extensions ring during the night To select which extensions ring during the dayTo stop extensions from ringing during the day Day mode start 830 a.m Night mode start 6pmExample Extension 12 barring is level Call barringCreating a hotline number Example Extension 12 is set for hotlineExtension 12 is set for normal Connecting a payphoneExtension 12 is set for payphone Call Sign on, delay off Connecting a fax machineResetting the system Call Sign on, delay onAnnounce System reset Playing music to callers on holdCall Director To select answering machine modeAnswering Machine To set-up Answering MachineAnswering delay is six rings Announces Answering delay is setAnswering delay is two rings Answering delay is nine ringsAnnounces Call Director is on To set up Call DirectorAnnounces Call Director is set Announces Call Director is offTo replay the Call Director OGM Record your call director message after the toneTo record a Call Director OGM Call Director, example OGMsPush square to confirm Playing back your messagesYour messages To hear how much recording time is remaining To program your PINTo operate your Answering Machine from another telephone Using your phone extensions Making and receiving callsTo transfer a call between extensions To put a call on holdTo hold a 3-way call To forward calls to another extensionAnnounces Extension divert is off Alarm on amAlarm cleared Announces Extension do not disturb is setRingback Extension X or Ringback Using your Ultimate 106 as a Room MonitorUsing Ringback To set the Room MonitorIntercom Ring a telephone number Using the speed dial memoryEnter 2 digit location and number To store the last dialled call as a speed dial number To dial a speed dial numberUsing BT Select Services Using Caller IdentificationTo review calling numbers To screen incoming calls using Caller IdentificationTo set the Caller Identification options at each extension To switch between 2 callers BT’s Call Waiting serviceTo use BT’s Call Waiting service Maintenance ServiceWall mounting To wall mount the Ultimate 106 base unitAre you in the correct programming mode i.e. program/normal HelpTechnical information DtmfUltimate 106 default settings Normal modeGlobal programming mode Index OGM Offices worldwide

Related manuals

Manual 45 pages 10.8 Kb