BT 106 To set the Caller Identification options at each extension, To review calling numbers

Page 32

Ultimate 106 – Edition 2 – Issue 3 - 24.12.02 – 5129

To set the Caller Identification options at each extension

Press keypad buttons in order shown

You must select the level of Caller Display functions you receive at each extension.

Lift the handset at the extension you wish.

8Enter this code.

1Switches Caller Display announcements off.

Or

2For announcements that indicate withheld or unavailable numbers.

Or

3For announcements that give a name linked to a number stored in the speed dial directory, as well as any withheld or unavailable numbers.

Or

4For Caller Identification announcements on all incoming calls. If no name is linked to the number, the number will be announced in full, including the national and international dialling codes.

✱To confirm.

To review calling numbers

#Enter this digit. The Ultimate 106 will announce the last calling number.

3Enter this digit. The Ultimate 106 will announce chronologically later numbers.

or Or

1Enter this digit. The Ultimate 106 will announce chronologically earlier numbers.

To screen incoming calls using Caller Identification

When you pick up the handset the number is announced to you.

To take the call, press Recall or wait.

To ignore a call, hang up. All phones will start to ring again. If Call Director or answer machine in ON, they will pick up after the programmed number of rings.

32

Image 32

Contents User Guide UltimateFor your records Personal Emergency NumbersContents Introduction Unpacking your UltimateInstallation Wall mounting the Ultimate Extension numbersInstall the required number Extension sockets To connect up to 6 master extension socketsConnect the extension sockets to the Ultimate Remove the lower cover from the UltimateConnect the power cable Connect the telephone line cordSystem settings To make any system settingsTime and date settings Time is 3.15pmMonday February 27th To set the timeTo set the ring delay Extension ring delay Day and night modesRing delay is 3 rings and day mode To select which extensions ring during the night To select which extensions ring during the dayTo stop extensions from ringing during the day Day mode start 830 a.m Night mode start 6pmCall barring Creating a hotline numberExample Extension 12 barring is level Example Extension 12 is set for hotlineExtension 12 is set for normal Connecting a payphoneExtension 12 is set for payphone Connecting a fax machine Resetting the systemCall Sign on, delay off Call Sign on, delay onAnnounce System reset Playing music to callers on holdTo select answering machine mode Answering MachineCall Director To set-up Answering MachineAnnounces Answering delay is set Answering delay is two ringsAnswering delay is six rings Answering delay is nine ringsTo set up Call Director Announces Call Director is setAnnounces Call Director is on Announces Call Director is offRecord your call director message after the tone To record a Call Director OGMTo replay the Call Director OGM Call Director, example OGMsPush square to confirm Playing back your messagesYour messages To hear how much recording time is remaining To program your PINTo operate your Answering Machine from another telephone Using your phone extensions Making and receiving callsTo put a call on hold To hold a 3-way callTo transfer a call between extensions To forward calls to another extensionAlarm on am Alarm clearedAnnounces Extension divert is off Announces Extension do not disturb is setUsing your Ultimate 106 as a Room Monitor Using RingbackRingback Extension X or Ringback To set the Room MonitorIntercom Ring a telephone number Using the speed dial memoryEnter 2 digit location and number To store the last dialled call as a speed dial number To dial a speed dial numberUsing BT Select Services Using Caller IdentificationTo review calling numbers To screen incoming calls using Caller IdentificationTo set the Caller Identification options at each extension To switch between 2 callers BT’s Call Waiting serviceTo use BT’s Call Waiting service Maintenance ServiceWall mounting To wall mount the Ultimate 106 base unitAre you in the correct programming mode i.e. program/normal HelpTechnical information DtmfUltimate 106 default settings Normal modeGlobal programming mode Index OGM Offices worldwide

Related manuals

Manual 45 pages 10.8 Kb