BT 106 Connect the extension sockets to the Ultimate, Remove the lower cover from the Ultimate

Page 7

Ultimate 106 – Edition 2 – Issue 3 - 24.12.02 – 5129

Only 2 wires are connected to terminals 2 and 5. Leave the 2 wires that are not used coiled up neatly in the back of the socket for future use.

Plastic wire grip

Pull the plastic wire grip tight, trapping the wire.

Finally, fit the front plate onto the backbox with the screws provided.

IMPORTANT

Please note, cable supplied may not match

exactly the colours specified.

Please ensure that the 2 wires used at the extension socket are the same 2 wires used at the Ultimate 106 connectors.

●2 Connect the extension sockets to the Ultimate 106

Remove the lower cover from the Ultimate 106.

					Power
					In Use
					Day/Night Mode
					Messages
			Call Director/Answer Machine
12v/	12v/		Ext 11	Ext12	Ext13 Ext14 Ext15 Ext16
Com N.O. N.C.			Ext 11	Ext12	Ext13 Ext14 Ext15 Ext16
	Doorlock/	Telephone			External Music On Hold Input Normal	Program
	Intercom	Line	EXT 11	EXT 12	EXT 13 EXT 14 EXT 15 EXT 16

Ultimate 106

There are 6 sets of twin screw connectors.

The telephone extension cable contains 4 strands of wire, 2 with broad orange or blue stripes, 2 with narrow orange or blue stripes.

IMPORTANT

If you have connected the 2 blue strands to the socket, you must also connect the blue strands to the twin screw connectors in the Ultimate 106.

Equally, if you have connected the 2 orange

strands to the extension socket, you must connect the 2 orange strands to the twin screw connector.

Strip the insulation cable off at the end in order to expose 5mm of copper wire for the blue or orange strands.

7

Image 7

Contents Ultimate User GuidePersonal Emergency Numbers For your recordsContents Unpacking your Ultimate IntroductionWall mounting the Ultimate Extension numbers InstallationTo connect up to 6 master extension sockets Install the required number Extension socketsRemove the lower cover from the Ultimate Connect the extension sockets to the UltimateConnect the telephone line cord Connect the power cableTo make any system settings System settingsTo set the time Time and date settingsTime is 3.15pm Monday February 27thRing delay is 3 rings and day mode Extension ring delay Day and night modesTo set the ring delay To stop extensions from ringing during the day To select which extensions ring during the dayTo select which extensions ring during the night Night mode start 6pm Day mode start 830 a.mExample Extension 12 is set for hotline Call barringCreating a hotline number Example Extension 12 barring is levelExtension 12 is set for payphone Connecting a payphoneExtension 12 is set for normal Call Sign on, delay on Connecting a fax machineResetting the system Call Sign on, delay offPlaying music to callers on hold Announce System resetTo set-up Answering Machine To select answering machine modeAnswering Machine Call DirectorAnswering delay is nine rings Announces Answering delay is setAnswering delay is two rings Answering delay is six ringsAnnounces Call Director is off To set up Call DirectorAnnounces Call Director is set Announces Call Director is onCall Director, example OGMs Record your call director message after the toneTo record a Call Director OGM To replay the Call Director OGMYour messages Playing back your messagesPush square to confirm To program your PIN To hear how much recording time is remainingTo operate your Answering Machine from another telephone Making and receiving calls Using your phone extensionsTo forward calls to another extension To put a call on holdTo hold a 3-way call To transfer a call between extensionsAnnounces Extension do not disturb is set Alarm on amAlarm cleared Announces Extension divert is offTo set the Room Monitor Using your Ultimate 106 as a Room MonitorUsing Ringback Ringback Extension X or RingbackEnter 2 digit location and number Using the speed dial memoryIntercom Ring a telephone number To dial a speed dial number To store the last dialled call as a speed dial numberUsing Caller Identification Using BT Select ServicesTo set the Caller Identification options at each extension To screen incoming calls using Caller IdentificationTo review calling numbers To use BT’s Call Waiting service BT’s Call Waiting serviceTo switch between 2 callers Service MaintenanceTo wall mount the Ultimate 106 base unit Wall mountingHelp Are you in the correct programming mode i.e. program/normalDtmf Technical informationNormal mode Ultimate 106 default settingsGlobal programming mode Index OGM Offices worldwide

Related manuals

Manual 45 pages 10.8 Kb