Panasonic KX-NT700 operating instructions Basic Connections

Page 22

Preparation

Basic Connections

This section explains all connections needed to make and receive IP line and TEL line calls.

To connect a Portable Station (PS) or computer to the unit, see page 41 or page 42, respectively.

D

LINE LAN DC IN

AAC Adaptor Cord

B LAN Cable

C 2-conductor Telephone Cord

D To AC Outlet

E To Switching Hub

FF Groove

G Telephone Jack or PBX (RJ11C)

A

B E G

C

1.Connect the unit to the desired IP network and/or telephone line.

•To connect to an IP network, connect a category 5 LAN cable to the LAN port and to a switching hub.

•To connect to a telephone line, connect a telephone cord to the LINE jack and to a modular telephone jack.

2.Connect the AC adaptor cord of the included AC adaptor to the unit’s DC input.

•To use PoE (Power over Ethernet), connect the LAN cable to a PoE-compatible (IEEE802.3af) switching hub or power supply. The included AC adaptor does not need to be connected when using PoE.

•If using an AC adaptor, use only the included AC adaptor (PQLV206).

•Pass the AC adaptor cord through the groove on the bottom of the unit.

3.Connect the AC adaptor to the AC outlet.

Note

•The AC adaptor must remain connected at all times (unless the unit is powered by PoE). It is normal for the adaptor to feel warm during use.

22

Operating Instructions

Document Version 2008/10

Image 22

Contents Model No. KX-NT700 IP Conferencing PhoneKX-NT700 Version 1.1 or later Outside Telephone Connection to a Panasonic Pure IP-PBX IP-PBX ModeLines Connection to a Compatible Panasonic Portable Station Standard Connection MethodsConnection to an Analog Telephone Network or PBX Connection to a ComputerConference Calls Other FeaturesHigh-quality Audio Conferencing Phone Manager Software Features PoE Power over Ethernet ReadySD Memory Card Recording Other Information Firmware Notice For Future ReferenceFor Your Safety Explanation of symbolsPlacement Preventing Data Loss For Best PerformanceData Security Preventing Data DisclosurePreventing Data Disclosure Over Network FCC Requirements Perchlorate Information Important Safety InstructionsRequired Telephone Cord InterferenceTable of Contents Other Information Included Accessories Accessory InformationOptional Accessories Unit Overview Main ViewFront Panel Understanding the Display Function Buttons and Function Button IconsStarting and Ending CallsEND Function Button IconsDescription Operation Other Icon Basic Connections Setting the Dial Mode Setting the Date & TimeTEL Line Settings Selecting the Available LinesAutomatic Assignment Dhcp IP Network SettingsManual Assignment Static SIP Settings IP Line Operation ModeUsing SD Memory Cards Formatting SD Memory Cards Formatting With a ComputerExternal Wired MIC Using the MicrophonesBuilt-in Microphones Uninstalling Conferencing Phone Manager Installing Uninstalling Conferencing Phone ManagerInstalling Conferencing Phone Manager System RequirementsLine Selection ExampleF2F2 Adjusting the Speaker VolumeMaking Calls Quieter LouderMaking a Call from the Phonebook RedialingEntering Dialing Pauses Press REDIAL/PAUSEEnding a Conference Call Making Conference CallsF1F1 Receiving a Second Call Call Waiting Adjusting the Ringer VolumeAnswering Calls While on an IP callFlash Useful Features Available During a CallMute Speech Speed ConversionEntering Characters Adding Entries to the PhonebookEditing Entries Character Entry ModesErasing 1 Entry Erasing EntriesErasing All Entries Character Tables Dial Key Alphabet Entry ModeExtended Character Entry Mode Character TablesRecording Voice Memos Recording FeaturesRecording Conversations Playing Back RecordingsErasing Recordings Features Available During PlaybackFeature Operation Erasing 1 RecordingUsing a PS Using a Portable Station PSLine Selection IP + PS Using a Computer Using a ComputerConnecting a Computer Line Selection IP + PCUsing Conferencing Phone Manager Changing SettingsUsing the Front Panel Restarting the UnitParameter List Programming Category Parameter ReferenceVlan ID Parameters Operation ModeBasic Settings Show IP AddressTime Format Ringer VolumeDate & Time RingtoneTEL Settings Line SelectionFlash Time IP Network SettingsIP Address Mode Pause TimeIP Address Protocol SettingsDefault Gateway Subnet MaskSIP Proxy Server IP Address SIP PasswordSIP User Domain Name SIP Registrar IP AddressVoIP Settings SIP ToS Field QoS SettingsVlan Priority RTP ToS FieldSystem Options Reset System DataSystem Status Confirmation Erase All Call Log DataReset All Data RebootErasing Data Resetting System DataResetting All Data Erasing the Redial ListStarting Conferencing Phone Manager Operating the Unit Using Conferencing Phone ManagerUsing the shortcut icon Exiting Conferencing Phone ManagerRestarting the Unit Using Conferencing Phone Manager Programming the Unit Using Conferencing Phone ManagerClick Restart Possible Cause & Solution TroubleshootingIssue General UseCannot make TEL calls Sound Quality Sound cuts out I can hear myself through the speaker SD Memory Cards PhonebookDisplay Messages Issue Possible Cause & SolutionProgramming MessageMessage No Connection To IP Network Cleaning the Unit Specifications SIPIndex Vlan ID Document Version 2008/10 When you ship the product Copyright PSQX4655ZA KK1008HF0