Programming the Unit
VoIP Settings
Preferred CODEC
Description
Determines the preferred codec for IP calls.
Available Settings
G.722
G.729a
Default Setting
G.722
RTP Packet Size
Description
Determines the size of outgoing RTP packets.
Available Settings
20 ms
30 ms
40 ms 50 ms
60 ms
Default Setting
20 ms
SIP Signaling Port Number
Description
Determines the port number used for SIP signaling.
•If this setting is changed, the unit must be restarted before the new setting becomes effective (see page 43).
Available Settings
Default Setting
5060
RTP Port Number (Minimum)
Description
Determines the lowest port number used for RTP.
•Set this parameter to a value lesser than the setting for "RTP Port Number (Maximum)".
Available Settings
(even values only)
Default Setting
51000
RTP Port Number (Maximum)
Description
Determines the highest port number used for RTP.
•Set this parameter to a value greater than the setting for "RTP Port Number (Minimum)".
Available Settings
(even values only)
Default Setting
52000
52
Operating Instructions | Document Version 2008/10 |