Programming the Unit
Flash Time
Description
Determines the flash time.
•Set this parameter to match the specification of the TEL line.
Available Settings
900 ms
700 ms
600 ms
400 ms
300 ms
250 ms
200 ms
160 ms
110 ms
100 ms
90 ms 
80 ms
Default Setting
700 ms
Pause Time
Description
Determines the length of the dialing pause inserted when [REDIAL/PAUSE] is pressed.
Available Settings
3 s
5 s
Default Setting
3 s
TEL Line Level Reduction
Description
Determines whether the incoming TEL line signal level is reduced. Set this feature to "On" if the volume of your voice heard from the speaker is too loud.
•When set to "On", the other party’s voice will be slightly quieter.
•We recommend setting this feature to "On" when establishing conference calls that use the TEL line.
Available Settings
On
Off
Default Setting
Off
IP Network Settings
Consult your system administrator for the appropriate settings.
IP Address Mode
Description
Determines whether the unit’s IP address is assigned automatically (DHCP) or manually (static).
•If this setting is changed, the unit must be restarted before the new setting becomes effective (see page 43).
Available Settings
DHCP
Static
Default Setting
Static
Document Version 2008/10 | Operating Instructions |
49