Panasonic KX-NT700 Using a Computer, Connecting a Computer, Line Selection IP + PC

Page 42

Using a Portable Station (PS) or Computer

Using a Computer

By connecting the unit to a computer, you can use the unit’s microphones and speaker for calls made or received with the computer using your preferred IP phone software.

Connecting a Computer

Connect the included PC Cable to the [AUDIO IN/ OUT] jack of the unit (A), and to the microphone jack (red plug; B) and headphone jack (green plug; C) of the computer.

B

A

C

 

Note

The microphone and speaker of the computer cannot be used while the computer is connected to the unit.

Line Selection (IP + PC)

1.Press [MENU].

2.Press LINE .

3.Select "IP + PC".

When "Line Selection" is set to "IP + PC", TEL calls cannot be made or received.

4.Press SAVE .

5.Press [MENU].

Using a Computer

1.Confirm that "PC" is shown in the upper-right corner of the display.

You can change the selected line by pressing the center function button ([F2]).

The IP line is selected.

The PC line is selected.

[F2][F2]

If you cannot select "PC", change the "Line Selection" setting to "IP + PC" (explained on this page).

2.Press [] to begin using the unit’s microphones and speaker.

Press [] again to turn off the microphones and speaker.

3.Use the desired computer software to make or answer a call.

4.Use the computer to end the call.

5.Turn off the unit’s microphones and speaker by pressing [].

Note

Leave at least 50 cm (about 20 in.) of space between the unit and the computer.

42

Operating Instructions

Document Version 2008/10

Image 42
Contents IP Conferencing Phone Model No. KX-NT700KX-NT700 Version 1.1 or later Connection to a Panasonic Pure IP-PBX IP-PBX Mode Outside TelephoneLines Connection to a Compatible Panasonic Portable Station Standard Connection MethodsConnection to an Analog Telephone Network or PBX Connection to a ComputerOther Features Conference CallsHigh-quality Audio PoE Power over Ethernet Ready Conferencing Phone Manager Software FeaturesSD Memory Card Recording Other Information Firmware Notice For Future ReferenceFor Your Safety Explanation of symbolsPlacement Preventing Data Loss For Best PerformanceData Security Preventing Data DisclosurePreventing Data Disclosure Over Network FCC Requirements Perchlorate Information Important Safety InstructionsRequired Telephone Cord InterferenceTable of Contents Other Information Accessory Information Included AccessoriesOptional Accessories Unit Overview Main ViewFront Panel Understanding the Display Function Buttons and Function Button IconsFunction Button Icons Starting and Ending CallsENDDescription Operation Other Icon Basic Connections Setting the Dial Mode Setting the Date & TimeTEL Line Settings Selecting the Available LinesIP Network Settings Automatic Assignment DhcpManual Assignment Static SIP Settings IP Line Operation ModeUsing SD Memory Cards Formatting SD Memory Cards Formatting With a ComputerUsing the Microphones External Wired MICBuilt-in Microphones Uninstalling Conferencing Phone Manager Installing Uninstalling Conferencing Phone ManagerInstalling Conferencing Phone Manager System RequirementsLine Selection ExampleF2F2 Adjusting the Speaker VolumeMaking Calls Quieter LouderMaking a Call from the Phonebook RedialingEntering Dialing Pauses Press REDIAL/PAUSEMaking Conference Calls Ending a Conference CallF1F1 Receiving a Second Call Call Waiting Adjusting the Ringer VolumeAnswering Calls While on an IP callFlash Useful Features Available During a CallMute Speech Speed ConversionEntering Characters Adding Entries to the PhonebookEditing Entries Character Entry ModesErasing Entries Erasing 1 EntryErasing All Entries Character Tables Dial Key Alphabet Entry ModeExtended Character Entry Mode Character TablesRecording Voice Memos Recording FeaturesRecording Conversations Playing Back RecordingsErasing Recordings Features Available During PlaybackFeature Operation Erasing 1 RecordingUsing a Portable Station PS Using a PSLine Selection IP + PS Using a Computer Using a ComputerConnecting a Computer Line Selection IP + PCUsing Conferencing Phone Manager Changing SettingsUsing the Front Panel Restarting the UnitParameter List Programming Category Parameter ReferenceVlan ID Parameters Operation ModeBasic Settings Show IP AddressTime Format Ringer VolumeDate & Time RingtoneTEL Settings Line SelectionFlash Time IP Network SettingsIP Address Mode Pause TimeIP Address Protocol SettingsDefault Gateway Subnet MaskSIP Proxy Server IP Address SIP PasswordSIP User Domain Name SIP Registrar IP AddressVoIP Settings SIP ToS Field QoS SettingsVlan Priority RTP ToS FieldSystem Options Reset System DataSystem Status Confirmation Erase All Call Log DataReset All Data RebootErasing Data Resetting System DataResetting All Data Erasing the Redial ListStarting Conferencing Phone Manager Operating the Unit Using Conferencing Phone ManagerUsing the shortcut icon Exiting Conferencing Phone ManagerProgramming the Unit Using Conferencing Phone Manager Restarting the Unit Using Conferencing Phone ManagerClick Restart Possible Cause & Solution TroubleshootingIssue General UseCannot make TEL calls Sound Quality Sound cuts out I can hear myself through the speaker SD Memory Cards PhonebookDisplay Messages Issue Possible Cause & SolutionProgramming MessageMessage No Connection To IP Network Cleaning the Unit Specifications SIPIndex Vlan ID Document Version 2008/10 When you ship the product Copyright PSQX4655ZA KK1008HF0