Panasonic KX-NT700 Protocol Settings, IP Address, Subnet Mask, Default Gateway, SIP Ext. No

Page 50

Programming the Unit

IP Address

Description

Determines the unit’s IP address.

•This parameter is only available when "IP Address Mode" is set to "Static".

•If this setting is changed, the unit must be restarted before the new setting becomes effective (see page 43).

Available Settings

—

Default Setting

192.168.0.2

Subnet Mask

Description

Set this parameter to match the IP address of the IP network’s subnet mask.

•This parameter is only available when "IP Address Mode" is set to "Static".

•If this setting is changed, the unit must be restarted before the new setting becomes effective (see page 43).

Available Settings

—

Default Setting

255.255.255.0

Default Gateway

Description

Set this parameter to match the IP address of the IP network’s default gateway.

•This parameter is only available when "IP Address Mode" is set to "Static".

•If this setting is changed, the unit must be restarted before the new setting becomes effective (see page 43).

Available Settings

—

Default Setting

0.0.0.0

Protocol Settings

Consult your system administrator for the appropriate settings.

SIP Ext. No.

Description

Set this parameter to match the extension number assigned to the unit through PBX programming.

•If this setting is changed, the unit must be restarted before the new setting becomes effective (see page 43).

Available Settings

Max. 32 digits

Default Setting

—

50

Operating Instructions

Document Version 2008/10

Image 50

Contents KX-NT700 Version 1.1 or later IP Conferencing PhoneModel No. KX-NT700 Lines Connection to a Panasonic Pure IP-PBX IP-PBX ModeOutside Telephone Connection to a Compatible Panasonic Portable Station Standard Connection MethodsConnection to an Analog Telephone Network or PBX Connection to a ComputerHigh-quality Audio Other FeaturesConference Calls SD Memory Card Recording PoE Power over Ethernet ReadyConferencing Phone Manager Software Features Other Information Firmware Notice For Future ReferenceFor Your Safety Explanation of symbolsPlacement Preventing Data Loss For Best PerformanceData Security Preventing Data DisclosurePreventing Data Disclosure Over Network FCC Requirements Perchlorate Information Important Safety InstructionsRequired Telephone Cord InterferenceTable of Contents Other Information Optional Accessories Accessory InformationIncluded Accessories Unit Overview Main ViewFront Panel Understanding the Display Function Buttons and Function Button IconsDescription Function Button IconsStarting and Ending CallsEND Operation Other Icon Basic Connections Setting the Dial Mode Setting the Date & TimeTEL Line Settings Selecting the Available LinesManual Assignment Static IP Network SettingsAutomatic Assignment Dhcp SIP Settings IP Line Operation ModeUsing SD Memory Cards Formatting SD Memory Cards Formatting With a ComputerBuilt-in Microphones Using the MicrophonesExternal Wired MIC Uninstalling Conferencing Phone Manager Installing Uninstalling Conferencing Phone ManagerInstalling Conferencing Phone Manager System RequirementsLine Selection ExampleF2F2 Adjusting the Speaker VolumeMaking Calls Quieter LouderMaking a Call from the Phonebook RedialingEntering Dialing Pauses Press REDIAL/PAUSEF1F1 Making Conference CallsEnding a Conference Call Receiving a Second Call Call Waiting Adjusting the Ringer VolumeAnswering Calls While on an IP callFlash Useful Features Available During a CallMute Speech Speed ConversionEntering Characters Adding Entries to the PhonebookEditing Entries Character Entry ModesErasing All Entries Erasing EntriesErasing 1 Entry Character Tables Dial Key Alphabet Entry ModeExtended Character Entry Mode Character TablesRecording Voice Memos Recording FeaturesRecording Conversations Playing Back RecordingsErasing Recordings Features Available During PlaybackFeature Operation Erasing 1 RecordingLine Selection IP + PS Using a Portable Station PSUsing a PS Using a Computer Using a ComputerConnecting a Computer Line Selection IP + PCUsing Conferencing Phone Manager Changing SettingsUsing the Front Panel Restarting the UnitParameter List Programming Category Parameter ReferenceVlan ID Parameters Operation ModeBasic Settings Show IP AddressTime Format Ringer VolumeDate & Time RingtoneTEL Settings Line SelectionFlash Time IP Network SettingsIP Address Mode Pause TimeIP Address Protocol SettingsDefault Gateway Subnet MaskSIP Proxy Server IP Address SIP PasswordSIP User Domain Name SIP Registrar IP AddressVoIP Settings SIP ToS Field QoS SettingsVlan Priority RTP ToS FieldSystem Options Reset System DataSystem Status Confirmation Erase All Call Log DataReset All Data RebootErasing Data Resetting System DataResetting All Data Erasing the Redial ListStarting Conferencing Phone Manager Operating the Unit Using Conferencing Phone ManagerUsing the shortcut icon Exiting Conferencing Phone ManagerClick Restart Programming the Unit Using Conferencing Phone ManagerRestarting the Unit Using Conferencing Phone Manager Possible Cause & Solution TroubleshootingIssue General UseCannot make TEL calls Sound Quality Sound cuts out I can hear myself through the speaker SD Memory Cards PhonebookDisplay Messages Issue Possible Cause & SolutionProgramming MessageMessage No Connection To IP Network Cleaning the Unit Specifications SIPIndex Vlan ID Document Version 2008/10 When you ship the product Copyright PSQX4655ZA KK1008HF0