DeWalt D55146R Installation, Assembly Fig, Grounding Instructions, Extension Cords

Page 10

English

AIR INTAKE FILTER

The filter (J) is designed to clean air entering the pump. To ensure the pump continually receives a clean, cool, and dry air supply the filter must always be clean and the filter intake must be free from obstructions.

J

INSTALLATION

1.The cord set and plug (R) with this unit contains a grounding pin (S). This plug MUST be used with a grounded outlet

(T).

IMPORTANT: The outlet being used must be installed and grounded in accordance with all local codes and ordinances.

R

T

S

Assembly (Fig. 1)

INSTALLING HOSES

WARNING: Risk of unsafe operation. Firmly grasp hose in hand when installing or disconnecting to prevent hose whip.

1.Ensure regulated pressure gauge reads 0 PSI (0 kPa).

2.Grasp the hose at the quick connect plug and push the plug into the quick connect body (E). Coupler will snap into place.

3.Grasp the hose and pull to ensure coupler is seated.

DISCONNECTING HOSES

WARNING: Risk of unsafe operation. Firmly grasp hose in hand when installing or disconnecting to prevent hose whip.

1.Ensure regulated pressure gauge reads 0 PSI (0 kPa).

2.Push coupler on quick connect body back to release quick connect plug on hose.

Grounding Instructions

WARNING: Risk of electrical shock. In the event of a short circuit, grounding reduces the risk of shock by providing an escape wire for the electric current. This air compressor must be properly grounded.

The portable air compressor is equipped with a cord having a grounding wire with an appropriate grounding plug.

2.Ensure the outlet being used has the same configuration as the grounded plug. DO NOT USE AN ADAPTER.

3.Inspect the plug and cord before each use. Do not use if there are signs of damage.

4.If these grounding instructions are not completely understood, or if in doubt as to whether the compressor is properly grounded, have the installation checked by a qualified electrician.

DANGER: Risk of electrical shock. IMPROPER GROUNDING CAN RESULT IN ELECTRICAL SHOCK.

•Do not modify the plug provided. If it does not fit the available outlet, a correct outlet should be installed by a qualified electri- cian.

•Repairs to the cord set or plug MUST be made by a qualified electrician.

Extension Cords

If an extension cord must be used, be sure it is:

•a 3-wire extension cord that has a 3-blade grounding plug, and a 3-slot receptacle that will accept the plug on the product

•in good condition

•plug is not worn

•no longer than 50 feet (15,2 m)

•12 gauge (AWG) or larger. (Wire size increases as gauge num- ber decreases. 10 AWG and 8 AWG may also be used. DO NOT USE 14 OR 16 AWG.)

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents D55146 Specifications D55146 Air CompressorPump/Motor Specifications Declared Noise Emission Values per ISO3744HOW to Prevent IT Definitions Safety GuidelinesImportant Safety Instructions Save These InstructionWhat can Happen HOW to Prevent IT Property damage Attachments & accessoriesTires Correct tire pressureEnglish To repair compressor with Never defeat the safety feaAttempting to operate Can expose you to movingNever stand on For Future USERized parts CompressorFeatures Fig Grounding Instructions InstallationAssembly Fig Extension CordsTransporting Voltage and Circuit ProtectionCompatibility Location LiftingPreparation for USE Pre-Start Checklist FigBREAK-IN Procedure Initial Set-up FigFollow Pre-Start Checklist under Preparation for Use Operating ProceduresMaintenance Start-up FigProcedure Daily Weekly Monthly Year or Maintenance ChartChecking Safety Valve Fig Checking Air Filter Element FigRepairs Accessories Service InformationFull One Year Warranty Date and Place of PurchaseGlossary Problem Code Troubleshooting GuideTroubleshooting Codes Code Possible Cause Possible SolutionWhile accessory is being used Under Features if pressure drop is excessiveUsed Extension Cords under Installation Fiche technique de la pompe/du moteur Compresseur d’air D55146Fiche technique Directives de sécurité importantes Définitions lignes directrices en Matière de sécuritéConserver CES Directives CE QUI Peut SE Produire Comment L’ÉVITER Avertissement Risque D’ÉCLATEMENTPneus AccessoiresLe manomètre pour empêcher un surgonflage Électrique le fait de Avertissement Risque DE Choc ÉlectriqueMise à la terre Avertissement Risque Provenant DES Objets Projetés EN L’AIRAvertissement Risque Associé AUX Pièces Mobiles Avertissement Attention Surfaces ChaudesAvertissement Risque Associé À Utilisation Dangereuse Avertissement Risque DE ChuteAvertissement Risque DE Blessure EN Soulevant LE Produit Conserver CES Directives Pour UN Usage UltérieurCaractéristiques Mise EN Garde Risque Associé AU BruitAssemblage Fig Directives relatives à la mise à la terreRallonges Protection de la tension et du circuitTransport EmplacementCompatibilité ÉlectricitéRéglage initial Fig Mode D’EMPLOIListe de vérification de pré-démarrage Fig Procédure DE RodageArrêt Fig Procédures DE Fonctionnement Démarrage FigEntretien Vérification de la soupape de sûreté Fig Programme d’entretienVérification des éléments du filtre d’air Fig Vidange du réservoir d’air Fig AccessoiresInformation sur les réparations Garantie complète d’un 1 an RéparationsGlossaire Codes de dépannage Code Cause Possible Solution PossibleGuide de dépannage Problème Code’utilisation de l’accessoire Il est normal que la pression chute lorsqu’un accessoiDe travail avec l’utilisation de l’accessoire Ne serrez pas tropTion de peinture. Lire lavertissement concernant les vapeurs InflammablesRéparation en usine de Dewalt ou un centre de réparation Agréé DewaltEspecificaciones Compresor de aire D55146Especificaciones de la Bomba y el Motor Valores de emisión de ruido declarados según ISO3744Peligro Riesgo DE Explosión O Incendio Instrucciones de seguridad importantesGuarde Estas Instrucciones ¿QUÉ Puede SUCEDER?Peligro Riesgo Respiratorio Asfixia Advertencia Riesgo DE Explosión Elementos y accesoriosAdvertencia Riesgo DE Descarga Eléctrica NeumáticosLa presión de éstos antes NeumáticoAdvertencia Riesgo DE Objetos Despedidos Advertencia Riesgo DE Superficies Calientes¿QUÉ Puede SUCEDER? Advertencia Riesgo POR Piezas Móviles¿QUÉ Puede SUCEDER? Cómo Evitarlo Advertencia Riesgo DE Caídas Conserve Estas Instrucciones Para Futuras ConsultasAdvertencia Riesgo DE Lesión POR Levantar Mucho Peso Cómo EvitarloCaracterísticas Fig Instalación Instrucciones de conexión a tierraEnsamblaje Fig Voltaje y protección del circuito Cables prolongadoresCompatibilidad Preparación Para EL USO LugarLista de control previa a la puesta en marcha Fig Procedimientos Operativos Puesta en marcha Fig Configuración inicial FigProcedimiento DE Puesta EN Marcha Inicial Apagado Fig MantenimientoControlar el elemento del filtro de aire Fig Tabla de mantenimientoControlar la válvula de seguridad Fig Procedimiento Diaria Semanal Mensual Vez alInformación DEL Servicio Técnico Drenar el tanque de aire FigAccesorios ReparacionesGarantía completa de un año VILLAHERMOSA, TABGlosario Problema Código Guía de detección de problemasCódigos de detección de problemas Código Causa Posible Solución PosibleEs normal que se presente alguna caída de presión cuando Jabonosa. No ajuste demasiadoSi la válvula aún pierde, debe ser reemplazada AccesorioInstalación Sobre vapor inflamableDel interruptor de presión Page Ewalt Industrial Tool Co., 701 Joppa Road, Baltimore, MD OCT06 Form No. A18765 D55146 Copyright 2006 D Ewalt
Top Page Image Contents