Parkside POE-1200 Attaching / detaching sanding sheets, Turn the backing plate in 60 steps

Preparing for use / Maintenance and cleaning / Disposal

Q Attaching / detaching sanding sheets

Warning! Always pull the mains plug is out of the socket before doing any work on the device.

Attaching:

jSanding sheets are attached to the backing plate 6 by means of the hook and pile fastening.

Detaching:

jSimply pull the sanding sheet off the backing plate 6 (see Fig. B).

QTurn the backing plate in 60° steps

Warning! Always pull the mains plug out of the socket before doing any work on the device.

jTurn the backing plate 6 of the delta sander in 60° steps until it engages in the desired position (see Fig. C).

Sanding and surfaces:

The shape of the delta sander allows you to sand workpieces even in their difficult to access places, corners and edges (see Fig. D).

Sanding performance and surface quality depend on the grade of sanding sheet and the oscillation speed setting.

jAlways use sanding sheets with grades that are suitable for the particular surface you are sanding. The speed selected should also be appropriate to the task undertaken.

QAdvice on use

jSwitch the device on before placing it against the workpiece.

jApply light sanding pressure only.

jAdvance the device at an even rate.

jChange sanding sheets at the appropriate time.

jDo not work on different types of material using the same sanding sheet (e.g. wood and then metal). To achieve the best sanding results you

should use unworn, undamaged sanding sheets.

jClean the sanding sheet from time to time with a vacuum cleaner.

QMaintenance and cleaning

Warning! Always pull the mains plug out of the socket before doing any work on the device.

The delta sander is maintenance-free.

jClean the device frequently. This should be done immediately after you have finished using it.

jFor cleaning the housing use a dry cloth only.

jRemove any adhering sanding dust with a nar- row paint brush.

jNever any kind of sharp object or petrol, sol- vents or cleaning agents that might attack plas- tic. Do not allow any liquids to enter the inside of the device.

jAlways keep the ventilation slots 5 clear.

QDisposal

The packaging is wholly composed of environmentally-friendly materials that can be disposed of at a local recycling centre.

Do not dispose of electrical power tools with the household rubbish!

In accordance with European Directive 2002 / 96 / EC (covering waste electrical and electronic equipment) and its transposition into national legislation, worn out electrical power tools must be collected separately and taken for environmentally compatible recycling.

Contact your local refuse disposal authority for more details of how to dispose of your worn out electrical devices.

GB

11