Laser Accessories
Recommended accessories for use with your tool are available for purchase at your
WARNING: Since accessories, other than those offered by DEWALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only DEWALT, recommended accessories should be used with this product.
If you need assistance in locating any accessory, please contact DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286, call
Laser Enhancement Glasses
Some laser kits include a pair of
marked with standard and metric scales. The laser FIG. 7 beam passes through the red plastic and reflects 
off of the reflective tape on the reverse side. The 
magnet at the top of the card is designed to hold 
the target card to ceiling track or steel studs to 
determine plumb and level positions. For best 
performance when using the Target Card, the 
DEWALT logo should be facing you.
Digital Laser Detector:
DW0772 (Fig. 8–10)
Some laser kits include a DEWALT Digital Laser Detector. The DEWALT Digital Laser Detector allows you to locate a laser beam emitted by a rotary laser in bright light conditions or over long distances. The detector can be used in both indoor and outdoor
English
Laser Enhancement Glasses (Fig. 6). These red lens glasses improve the visibility of the laser beam under bright light conditions or over long distances when the laser is used for interior applications. These glasses are not required to operate the laser.
FIG. 6
situations where it is difficult to see the laser beam.
FIG. 8
DD U
V
CAUTION: These glasses are not ANSI approved safety glasses and should not be worn while operating other tools. These glasses do not keep the laser beam from entering your eyes.
DANGER: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, NEVER STARE DIRECTLY INTO THE LASER BEAM, WITH OR WITHOUT THESE GLASSES.
Target Card
Some laser kits include a Laser Target Card (Fig. 7) to aid in locating and marking the laser beam. The target card enhances the visibility of the laser beam as the beam crosses over the card. The card is
15
Z
AA 
W
X