Delta Electronics 14-651 instruction manual Functional Description, Carton Contents

FUNCTIONAL DESCRIPTION

FOREWORD

The DELTA® Model 14-651 is easier to operate than a conventional drill press equipped with a mortising attachment. The model 14-651 is made of cast-iron and steel for rigidity and stability, and comes with a standard 3-jaw type chuck for positive gripping of mortising bits.

NOTICE: The photo on the manual cover illustrates the current production model. All other illustrations contained in the manual are representative only and may not depict the actual labeling or accessories included. These are intended to illustrate technique only.

CARTON CONTENTS

2

1

3

4

8	11
9
	12
10
	13
14
15
16
17
	5
	6
	7

1.Mortiser

2.Tool and Chisel Holder

3.Chuck Key / Wrench

4.Column Extension

5.Hydraulic Cylinder

6.Handle

7.Extended hold-down rod (use with column extension)

8.Special Screw (for raising and lowering handle)

9.M8 x 1.25 x 80mm Head Screw (4) (for attaching column extension to base)

10.M6 x 1 x 12mm Pan Head Screws (2) (for attaching tool and chisel holder)

11.Spring

12.Bushing (for use with extra long chisels)

13.M6 Lockwashers (2) (for assembling tool and chisel holder)

14.1/2” Mortising Chisel and Bit

15.3/8” Mortising Chisel and Bit

16.5/16” Mortising Chisel and Bit

17.1/4” Mortising Chisel and Bit

6