Aquacal 100 Heater Controls, Control Panel Layout, Control Buttons, Indicator Lights, & Display

HEATER CONTROLS

Control Panel Layout

(APPEARANCE VARIES BY MODEL)

Control Buttons, Indicator Lights, & Display

(AS INDICATED BY CIRCLED NUMBERS)

1)POOL / SPA SELECTOR – Selects either pool or spa thermostat.

2)COOLING INDICATOR LIGHT – Indicates unit is cooling. (Note: This light and associated text will not be present on heat only models)

3)UP ARROW – Increases temperature setting. (Maximum setting is 104 oF)

4)DOWN ARROW – Decreases temperature setting. (Minimum setting is 45 oF)

5)HEATING INDICATOR LIGHT – Indicates unit is heating.

6)MODE SELECTOR – Used to select between the Heating, Cooling, Auto- Changeover, and Off for Heat & Cool models. Used to select between Heating and Off for heat-only models.

7)SPA INDICATOR LIGHT – Indicates heater is referencing spa thermostat.

8)POOL INDICATOR LIGHT – Indicates heater is referencing pool thermostat.

9)LED DISPLAY – Displays water temperature when no keys are being pressed. Displays desired temperature when UP ARROW or DOWN ARROW is pressed. Also displays operational, programming, and fault codes as applicable.

10)DESIRED TEMPERATURE LIGHT – Indicates temperature set point is being displayed. Indicates temperature set point is being changed due to the UP ARROW or DOWN ARROW being pressed.

11)WATER TEMPERATURE LIGHT – Indicates current water temperature is being displayed.

12