Aquacal 100 Microprocessor Level-2Set Up & Calibration Codes, Service Adjustable Parameters, Menu

Controls Configuration & Adjustments...

Microprocessor Level-2 Set Up & Calibration Codes

Service Adjustable Parameters

Code	Description	Factory Setting	Range
[LOC]	Service Lock Code	50	00-99
[dEL]	4-minute Delay on Make	1	0 / 1
[JAO]	External Controller Interface	0	0 / 2 / 3
[FS2]	Flow Switch/Auto T-Stat Switching	0	0 / 1
[tSC]	Water Sensor Calibration	Factory Calibrated	+10o to –10oof display
[dSC]	Defrost Sensor Calibration	Factory Calibrated	+10o to –10oof display
[dBS]	Spa Dead Band Differential	1o	1o to 5o
[dBP]	Pool Dead Band Differential	1o	1o to 5o

Microprocessor Factory Default Settings

Level –1 and Level-2 Default Settings

Menu	Code	Description	Default Value	Range
Level-1	[CF1]	Celsius/Fahrenheit	1	0 / 1
Level-1	[ULC]	User Lock Code	0	0 / 1
Level-1	[ELC]	Enter Lock Code	0	00-99
Level-1	[CFO]	Call / Flex	0	0 / 1 / 2
Level-1	[LOC]	Service Lock Code	50	00-99
				For Heat Only
				OFF/HEAT
Mode	Key Pad	Operating Mode	OFF	For Heat & Cool
				OFF, HEA,
				COO, ACH
Thermostat	Key Pad	Thermostat Settings Pool & Spa	OFF	45oF – 104oF
Level-2	[dEL]	4-minute Delay on Make	1	0 / 1
Level-2	[JAO]	External Controller Interface	0	0 / 2 / 3
Level-2	[FS2]	Flow Switch / Auto T-Stat	0	0 / 1
		Switching
Level-2	[tSC]	Water Sensor Calibration	Factory	+10o to –10oof
			Calibrated	displayed value
Level-2	[dSC]	Defrost Sensor Calibration	Factory	+10o to –10oof
			Calibrated	displayed value
Level-2	[dBS]	Spa Dead Band Differential	1o	1o to 5o
Level-2	[dBS]	Spa Dead Band Differential	1o	1o to 5o

51