Festool PI571579, PN571579, PD571579 Troubleshooting, Problem Possible causes Remedy

Page 17

Troubleshooting

Problem	Possible causes	Remedy

PLANEX bumps over	Suction power too strong	Reduce suction power or switch to external
the surface.		extraction if necessary.
	Hard repair compound or hard sublayers	Reduce suction power or switch to external
		extraction if necessary.

		Reduce speed.

Extraction power is	Main ﬁlter on CT 36 E AC-LHS blocked /	Clean the main ﬁlter regularly:
insufﬁcient.	clogged.	Option 1: Clean the main ﬁlter with Auto-
		Clean, set the suction power control to the
		maximum setting. Cover the nozzle, suction
		hose or intake opening on the extractor with
		the surface of your hand for 10 seconds un-
		til the automatic cleaning cycle starts.
		Option 2: Clean the main ﬁlter mechanically
		(extracting).
		Option 3: Check the main ﬁlter for damage
		and clogging. Insert a new ﬁlter element
		regularly.
	Disposal bag inserted incorrectly.	The holes punched in the disposal bag must
		be inside the container.
	Filter bag inserted instead of disposal	Always work with the disposal bag when
	bag.	operating the PLANEX (grey bag).
	Suction power setting on CT 36 E AC-	Adjust the suction power to a higher set-
	LHS too low.	ting.
	Speed of PLANEX too fast	Reduce speed.
	Internal extraction on PLANEX with ex-	Increase suction power or switch to exter-
	traction control on setting 1	nal extraction.
	Repair compound with a high percent-	Switch on the external extractor connected
	age of ﬁller, soft ﬁller	to the PLANEX, set the extraction control to
		setting 6, in extreme cases, turn down the
		speed.
	Suction hose blocked or kinked.	Remove blockage and straighten hose.
	Disposal bag full	Dispose of the bag.
Excessive material	Speed of PLANEX too fast	Reduce speed.
removed from work-
removed from work-	Suction power of the PLANEX too strong	Reduce suction power or switch to external
piece		extraction.
	Repair compound with a high percent-	Switch on the external extractor connected
	age of ﬁller, soft ﬁller	to the PLANEX, set the extraction control to
		setting 6, in extreme cases, turn down the
		speed.
	Grit on abrasive too coarse	Select a ﬁner grit.

17

Image 17

Contents Manual de instrucciones Guide d’utilisationPage Page Page Page Symbols ContentSafety instructions General safety instructionsPersonal Safety Machine-related safety instructionsPower Tool USE and Care ServiceCause and prevention of kickbacks Functional description Technical dataHealth hazard by dust Intended use Machine settingsCommissioning Extension cordChanging sanding pads ElectronicsSmooth start-up Speed controlAdjusting the suction power Adjusting the internal/ex Ternal extractionSymbol Afﬁxing abrasivesDust extraction Sanding close to edgesOperation Breathing in dust can damage the respiratory passageLED ﬂashing quickly LED ﬂashing slowlySystainer Service and maintenanceAccessories, tools Conditions of 1+2 Warranty WarrantyFestool Limited Warranty DisposalProblem Possible causes Remedy TroubleshootingAllow the machine to cool and apply less Sommaire SymbolesConsignes de sécurité Consignes de sécurité généralesUtilisation ET Emploi Soigneux DE L’OUTIL Electroportatif Securite DES PersonnesMoins souvent et peuvent être guidés plus faci- lement Consignes de sécurité spé Ciﬁques à la machineIndications davertisse- ment supplémentaires Origine et prévention des retoursCaractéristiques techniques La poussière, un risquepour la sanComposants de loutil Utilisation conforme Aux prescriptionsCâble de rallonge Mise en serviceRéglages de la machine Montage de la ponceuse PlanexSystème électronique Remplacement du pla Teau de ponçageDémarrage progressif Régulation de la vitesseRéglage de laspiration Térieure / extérieure Symbole Aspiration UtilisationFixation de labrasif Aspiration Ponçage près des bordsRisques de blessures FonctionnementSignaux davertissement visuels sur la tête de ponçage Clignotement lent de la LEDClignotement rapide de la LED Accessoires et outilsEntretien Garantie EliminationConditions de la garantie 1+2 ans Garantie limitée de FestoolProblème Causes possibles Remèdes DépannagePlanex Símbolos ContenidoIndicaciones de seguridad Indicaciones de seguridad generalesTrato Y USO Cuidadoso DE Herramientas Eléctricas Seguridad DE PersonasServicio Indicaciones de seguridad EspecíﬁcasIndicaciones de advertencia adicionales Causas y prevención de contragolpesIndicaciones de seguridad especiales para el lijado ﬁno Datos técnicos Riesgos para la salud producidos Por el polvoComponentes Uso conforme a lo previstoPeligro de accidente, electrocución Ajustes de la máquinaMontaje de la Planex Fijación del abrasivo Sistema electrónicoCambio del plato lijador Aspiración Utilización Ajuste de aspiración en Teriores/exterioresAjuste de la potencia de aspiración El polvo aspirado puede dañar las vías respi- ratorias Lijado cerca de los bordesAspiración Peligro de lesiones FuncionamientoLijado Parpadeo lento del LEDAccesorios, herramientas Mantenimiento y cuidadoParpadeo rápido del LED Sa.comGarantiá Eliminación de residuosCondiciones de la Garantía 1 + Garantía limitada de FestoolReparación de averías Problema Posibles causas SoluciónReducir la potencia de aspiración o cam