Festool PI571579, PN571579 Sanding close to edges, Dust extraction, Operation, Risk of injury

Page 13

7-1

1

Sanding close to edges

The detachable brush segment allows you to re- duce the distance between the wall/ceiling and the side of the sanding pad.

f Press and hold the knob [7-1]. f Remove the brush segment [7-2].

There is a retainer in the lid of the SYSTAINER for storing the brush segment.

fHook in the brush segment at the opposite end to the knob [7-1], swivel towards the sanding head and engage into position.

7	7-2
7		2
		2
8	8-1	8-2

1

2

8-48-3

Dust extraction

CAUTION

Breathing in dust can damage the respiratory passage!

fAlways connect the machine to a dust extrac- tor.

fWhen performing work that generates dust, always wear a dust mask.

A Festool dust extractor with an extractor hose diameter of 27 mm or 36 mm (recommended due to the improved suction power) can be connected to the extractor connector [8-2].

The special extraction hose and special suction sleeve [8-1] (available as an accessory) ensure permanent attachment and protect against kinking.

Use the dust extractor CT 36 E AC-LHS on large surfaces because this extractor guarantees the permanent suction power required.

f Press the green button [8-4] to open the me- chanical lock [8-3].

fAttach the extraction hose on the dust extractor to the outlet spigot [8-2].

fSwivel the mechanical lock [8-3] upwards until it engages.

Operation

WARNING

Risk of injury

fDo not hold the machine by the head.

fHold the machine with both hands.

fMake sure that all clamping levers are closed before operating the machine.

13

Image 13

Contents Manual de instrucciones Guide d’utilisationPage Page Page Page Symbols ContentSafety instructions General safety instructionsPersonal Safety Machine-related safety instructionsPower Tool USE and Care ServiceCause and prevention of kickbacks Health hazard by dust Technical dataFunctional description Intended use Machine settingsCommissioning Extension cordChanging sanding pads ElectronicsSmooth start-up Speed controlAdjusting the suction power Adjusting the internal/ex Ternal extractionSymbol Afﬁxing abrasivesDust extraction Sanding close to edgesOperation Breathing in dust can damage the respiratory passageLED ﬂashing quickly LED ﬂashing slowlyAccessories, tools Service and maintenanceSystainer Conditions of 1+2 Warranty WarrantyFestool Limited Warranty DisposalProblem Possible causes Remedy TroubleshootingAllow the machine to cool and apply less Sommaire SymbolesConsignes de sécurité Consignes de sécurité généralesUtilisation ET Emploi Soigneux DE L’OUTIL Electroportatif Securite DES PersonnesMoins souvent et peuvent être guidés plus faci- lement Consignes de sécurité spé Ciﬁques à la machineIndications davertisse- ment supplémentaires Origine et prévention des retoursCaractéristiques techniques La poussière, un risquepour la sanComposants de loutil Utilisation conforme Aux prescriptionsCâble de rallonge Mise en serviceRéglages de la machine Montage de la ponceuse PlanexSystème électronique Remplacement du pla Teau de ponçageDémarrage progressif Régulation de la vitesseFixation de labrasif Symbole Aspiration UtilisationRéglage de laspiration Térieure / extérieure Aspiration Ponçage près des bordsRisques de blessures FonctionnementSignaux davertissement visuels sur la tête de ponçage Clignotement lent de la LEDEntretien Accessoires et outilsClignotement rapide de la LED Garantie EliminationConditions de la garantie 1+2 ans Garantie limitée de FestoolProblème Causes possibles Remèdes DépannagePlanex Símbolos ContenidoIndicaciones de seguridad Indicaciones de seguridad generalesTrato Y USO Cuidadoso DE Herramientas Eléctricas Seguridad DE PersonasServicio Indicaciones de seguridad EspecíﬁcasIndicaciones de seguridad especiales para el lijado ﬁno Causas y prevención de contragolpesIndicaciones de advertencia adicionales Datos técnicos Riesgos para la salud producidos Por el polvoComponentes Uso conforme a lo previstoMontaje de la Planex Ajustes de la máquinaPeligro de accidente, electrocución Cambio del plato lijador Sistema electrónicoFijación del abrasivo Ajuste de la potencia de aspiración Ajuste de aspiración en Teriores/exterioresAspiración Utilización Aspiración Lijado cerca de los bordesEl polvo aspirado puede dañar las vías respi- ratorias Peligro de lesiones FuncionamientoLijado Parpadeo lento del LEDAccesorios, herramientas Mantenimiento y cuidadoParpadeo rápido del LED Sa.comGarantiá Eliminación de residuosCondiciones de la Garantía 1 + Garantía limitada de FestoolReparación de averías Problema Posibles causas SoluciónReducir la potencia de aspiración o cam