General safety advice
b)Avoid touching earthed surfaces such as pipes, radiators, ovens and refrigerators with any part of your body. There is an in- creased risk of electric shock if your body is earthed.
c)Keep the device away from
rain or moisture. Water entering an electrical device increases the risk
of electric shock.
d)Do not use the mains lead for
any purpose for which it was 
not intended, e.g. to carry the device, to hang up the device or to pull the mains plug out of the mains socket. Keep the mains lead away from heat, oil, sharp edges or moving parts of the device. Damaged or tangled mains leads in- crease the risk of electric shock.
e)When working outdoors with an electri- cal power tool always use extension ca- bles that are also approved for use out- doors. The use of an extension cable suitable for outdoor use reduces the risk of electric shock.
3. Personal safety
a)Remain alert at all times, watch what you are doing and always proceed with cau- tion. Do not use the device if you are tired or under the influence of drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury.
b)Wear personal protective equipment and always wear safety glasses. The
wearing of personal protective equipment such as dust masks,
c)Avoid unintentional operation of the de- vice. Make sure that the switch is in the “OFF” position before you insert the mains plug into the mains socket. Acci- dents can happen if you carry the device with your finger on the switch or you have already switched the device on before you connect it to the mains.
8 GB/IE/CY
d)Remove any setting tools or spanners before you switch the device on. A tool or spanner left attached to a rotating part of a device can lead to injury.
e)Do not overestimate your own abili- ties. Keep proper footing and balance at all times. By doing this you will be in a better position to control the device, especially in unforeseen circumstances.
f)Wear suitable clothing. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves clear of mov- ing parts. Loose clothing, jewellery or long hair can become trapped in moving parts.
g)If vacuum dust extraction and collec- tion devices are fitted do not forget to check that they are properly connect- ed and correctly used. The use of these devices reduces the hazard presented by dust.
4.Careful handling and use of electrical power tools
a)Do not overload the device. Always use an electrical power tool that is intended for the task you are undertaking. By us- ing the right electrical power tool for the job you will work more safely and achieve a better result.
b)Do not use an electrical power tool if its switch is defective. An electrical pow- er tool that can no longer be switched on and off is dangerous and must be repaired.
c)Pull the mains plug from the socket be- fore you make any adjustments to the de- vice, change accessories or when the de- vice is put away. This precaution is intended to prevent you from unintentionally starting the device.
d)When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are danger- ous when they are used by inexperienced people.
e)Look after the device carefully. Check that moving parts are working properly and