Stopping your appliance
If you have started the heating cycle and then decide you want to stop for any reason before dispensing the water or during dispensing, simply press the stop button D (fig 6). The boiled water will be safely transferred back into the water tank. After a few seconds, you can start the heating procedure again.
NB: The noise during use is due to the water heating up. This is normal.
During use, a certain amount of the water boiled will be transferred back to the water tank. This means the water tank may become hot. The stainless steel parts may also become hot. Do not touch the stainless steel parts when using your appliance. Always handle your appliance with care.
Always switch off and unplug your appliance and let it completely cool down before cleaning. Never immerse the base unit, power cord, plug or water tank in water or any other liquid. Do not use harsh abrasives, chemicals or oven cleaners.
WARNING:
By pressing the start button you will be put- ting the appliance into an
"already on" mode it will begin a heating cycle as soon as it is put back on the power base. Please remember to press the stop button as soon as the appliance is put back onto the power base.
4
Cleaning your appliance
Emptying your appliance
1.After your appliance has completely cooled down, unplug it from the mains socket and remove the appliance from the power base.
2.Press the lid open button.(H)
3.Hold your appliance over a sink and pour the water out by tilting your appliance on one side. (fig 7)
4.Still holding your appliance over the sink, turn it the right way up and press the start button. Then let any water from the dispense chamber drain from the dispensing nozzle C (fig 8)
5.Repeat steps 3 and 4 until all the water has been emptied from your appliance.
If your appliance is not going to be used for a long period (e.g. during holiday), we recommend that before you leave you empty it. Before using it again, fill the tank with tap water and then carry out a few heating cycles and carefully discard the water each time. To clean the removable drip tray, lift it off the power base and clean it using warm water and
Cleaning
Clean the exterior surface of your appliance with a damp cloth and then polish it with a soft and dry cloth. Do not use steel wool pads or abrasive sponges.