Preferred capture path
For Normal or Graphics mode
For best results using Normal or Graphics mode, use a
Be sure to keep the HP CapShare appliance in constant contact with the page you are capturing. Lift the appliance from the page to end the capture.
For Flip Chart mode
For the best results when capturing flip charts, use a side to side motion, copying only the portions of the page that contain information.
Pages copied in this mode are reduced to 25% of their original size.
Therefore,
Other capture paths
You can also use other capture paths, as long as the total capture area does not exceed 119 square inches (767.55 square cm) when in Normal or Graphics mode or 13 square feet (1.2 square meters) when in Flip Chart mode. You may need to rotate the page on the appliance screen after capturing when using alternative capture paths.
3 Copying a Page | 9 |