Motorola 6809494A40-O manual Charging the Module, Assembling, Mounting the Module on your Eyewear

Charging the Module
	Important: Charge the Bluetooth module for 2.5 hours before using it the
	first time.
To charge the module:
1	Plug the charger plug into a electrical wall outlet.
2	Open the rubber cover on the top part
	of the module and plug the silver
	side of the charger cable into the
	charging port.
	Be sure to align the plug correctly.
	If the plug does not connect to the
	module easily, try flipping it over and
	re-inserting.
	The indicator light on the module will

Assembling			™
RAZRWIRE includes your Oakley eyewear and a Bluetooth module. Here’s a
quick anatomy lesson of the module.
Charging	Attachment
Port	Clamp
Ear
Speaker
			Microphone
Multifunction	Indicator	Volume	Volume
Button	Light	Down	Up
Mounting the Module on your Eyewear

	be solid red while it is charging.
3	When the indicator light turns off, charging is complete.
Note: With an optional USB Cable sold separately through Oakley dealers, you
can charge the module by plugging it into any computer USB port. That way, you
can leave the wall charger at home and use the USB Cable at the office, or
anywhere you have access to a computer.

To mount the module on the right side of your eyewear
frames:
1	With the attachment clamp open, hold the module
	in your right hand.
	Note: If the clamp on your module is closed, gently
	twist the clamp until it snaps open.
2	Hold the right arm of the frames in your left hand.
3	Drop the arm of the frame into the groove of the
	attachment clamp.
4	Snap the top of the attachment clamp closed.
	Note: If you need to mount the module on the left
	side of the eyewear frames, see Mounting the
	Module on the Left Side of your Eyewear on page 7.

Step 3 Step 4

3