Hearth and Home Technologies PALOMA-BL, PALOMA-GR, PALOMA-BZ Existing Masonry Chimney, Type a

J. Existing Masonry Chimney

Type A Type B

CHIMNEY LINER

TERMINATION CAP PART

#923GK

		3 IN. (76 MM) FLEX LINER
CO-AXIAL TO CO-LINEAR
CONNECTOR PART		CO-AXIAL TO CO-LINEAR
#923GCL		CONNECTOR PART #923GCL
		PIPE LENGTH
	PIPE LENGTH	(OPTIONAL)
	(OPTIONAL)
		SHOWING TWO 30 FT.
		(9 M) SECTIONS OF
		FLEX LINER

CHIMNEY LINER TERMINATION

CAP PART #923GK

30 ft. (9 m) OF 3 in. (76 mm)

FLEX LINER EXHAUST

SECTION

THIS SECTION OF THE

CHIMNEY MUST BE SEALED

THE CHIMNEY MUST BE

SEALED FROM THE 4 ft. (1 m)

SECTION TO TERMINATION

USING A SMOKE SHELF OR A

DAMPER. THE SEAL SHOULD

BE 6 in. (152 mm) BELOW THE

END OF THE 4 ft. (1 m) AIR

INTAKE SECTION.

4 ft. (1 m) OF 3 in. (76 mm)

FLEX LINER

“AIR INTAKE SECTION”

Type C - Up & Out Installation

TERMINATION CAP

PART #SLK-991DA

TOP ADAPTER FLASHING

4 in. (102 mm)

RETROFLEX LINER CONNECTOR

90º ELBOW

DIRECT

VENT PIPE

Figure 5.24

Type D - Hearth Mount

CHIMNEY LINER

TERMINATION CAP

PART #923GK

30 FT. (9 m) OF 3 IN. (76 mm)

FLEX LINER

EXHAUST SECTION

THIS SECTION OF

THE CHIMNEY MUST

BE SEALED

ALCOVE CLEARANCE TO

COMBUSTIBLES MUST BE

MAINTAINED

CHIMNEY MUST BE SEALED

FROM 4 FT. (1 m) SECTION TO

TERMINATION USING A SMOKE

SHELF OR A DAMPER*. SEAL SHOULD BE 6 IN. (152 mm) BELOW END OF 4 FT. (1 m) AIR

INTAKE SECTION.

4 FT. (1 m) OF 3 IN. (76 mm)

FLEX LINER

AIR INTAKE SECTION

CO-AXIAL TO CO-LINEAR

CONNECTOR PART# 923GCL

*NOTE: In the Commonwealth of Massachusetts, the word damper shall be replaced with the words flue restrictor.

Heat & Glo • Paloma • 7031-220 Rev. P • 10/08 21