Hearth and Home Technologies PALOMA-BL, PALOMA-GR, PALOMA-BZ, PALOMA-GY FIG. C Minimum Clearance

FIG. A 90 DEGREE ELBOW

USE HEAT SHIELD / WALL THIMBLE

PLACE MARK WHERE PROTRUDES THROUGH

EXTERIOR WALL TO CUT OFF EXCESS

90° ELBOW

CENTER LINE

	PIPE LENGTH
	TRIM RING
PIPE LENGTH	HTI VENT HHW2 PART #841-0670
	(RECOMMENDED FOR OPTIMUM PERFORMANCE)

FIG. B 45 DEGREE ELBOW

TRIM RING

HEAT SHIELD OVER PIPE

45° ELBOW

5 IN. (127 MM) CLEARANCE FROM APPLIANCE CORNER TO COMBUSTIBLE WALL

5 IN. (127 MM) CLEARANCE FROM APPLIANCE CORNER

FIG. C MINIMUM CLEARANCE

INTERIOR WALL - 2 IN. (51

MM)CLEARANCE FROM REAR OF STOVE

CENTER LINE

MINIMUM OF 6 IN. (152 MM)

OF PIPE THROUGH THE WALL

WALL THIMBLE

	HTI VENT HHW2 PART
HEAT SHIELD OVER	#841-0670 (RECOMMENDED
TOP HALF OF PIPE	FOR OPTIMUM PERFORMANCE)

TRIM RING

Snorkel Cap Kit (SLK-SNKD) must be used for horizontal vent runs with no vertical rise.

Figure 5.35

Heat & Glo • Paloma • 7031-220 Rev. P • 10/08 25