5.Remove the gripper, by grasping the bobbin pin in the centre and pulling the gripper out.
Notice
The gripper cannot be dismantled when the needle is lowered.
Cleaning the bobbin case carrier with the gripper track
1.Using the brush J remove all accumulated fluff and remnants of thread from the retainer ring u, from the gripper, the gripper dog and the bobbin case carrier with the gripper track.
2.A
3.Clean the dismantled gripper in the same way.
4.Reassemble the parts by reinserting the gripper and the retainer u in the bobbin capsule carrier and then turning the catches i to their original position so that they keep the retainer u in place.
Cleaning the carrier of the feed dog on the stitch plate
1.Remove the stitch plate a, using the stitch plate opener H to screw out the mounting screws.
2.Clean the catch teeth of the feed dog and the outside of the bobbin case carrier with the brush J.
Storage
•Remove the power plug k from the wall socket if you are not using the sewing machine.
•Place the protective cover L over the sewing machine to protect it from dust.
•Store the sewing machine in a dry location.
Technical data
Power supply: | |
Power consumption: | 85 W (Lamp: 15 W, Motor: 70 W) |
Light bulb: | E14, 15 W |
Protection class: | II |
Disposal
Do not dispose of the appliance in your normal domestic waste. This product is subject to the European guideline 2002/96/EC.
Dispose of the appliance through an approved disposal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal centre.
Dispose of all packaging materials in an environmentally friendly manner.
Warranty & Service
The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously exami- ned before delivery. Please retain your receipt as proof of purchase.
In the case of a warranty claim, please make contact by telephone with our service department. Only in this way can a
The warranty covers only claims for material and manufacturing defects, not for wearing parts or for damage to fragile components. This product is for private use only and is not intended for commercial use.
The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. Your statutory rights are not restricted in any way by this warranty.
DES Ltd Units
Bilston Industrial Estate Oxford Street Bilston
WV14 7EG
Tel.: 0870 787 6177
Fax: 0870 787 6168
Kompernass Service Ireland
c/o Irish Connection
41 Harbour view Howth Co. Dublin Tel:
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
www.kompernass.com
- 16 -