Bradford-White Corp PDX250T6*F(BN, PDX75S70F(B, CX), C)*(N, PDX65S65F(B warranty Specifications

PDX Series

Specifications

Power supply	Dedicated 115VAC, 60 Hz, 15A
Gas Supply Pipe	Minimum 1/2" NPT (schedule 40 black iron pipe recommended)
Approved Gas Type	Natural or Propane. Unit must match gas type supplied.
Gas Pressure	5.0" W.C. min. for Nat gas, 11.0" W.C. min. for L.P. gas, 14.0" W.C. maximum (Nat. & L.P.)
Venting System	Power vent through the wall or vertical through the roof
Approved Vent Materials	PVC, CPVC or ABS
Minimum Clearance	18" from top, 24" from front, 4" sides and rear.
for Servicing
Water Supply Pressure	150 PSI maximum allowable working pressure. Check local codes for supply pressure
Thermal well TCO Limit	Residential 188°F (87°C), Commercial 199°F (93°C)
Residential Temperature	60°F (16°C) to 160°F (71°C) (Approximate temperatures)
Set Point Range
Commercial Temperature	80°F (27°C) to 180°F (82°C) (Approximate temperatures)
Set Point Range
Blower Temperature	Normally closed, opens @ 165°F (74°C), auto reset @ 130°F (54°C).
Switch
Pressure switch	Exhaust-Normally open, closes on vacuum increase @ -1.30.
	Intake-Normally closed, opens on vacuum increase @ -1.15.
Blower	115VAC, 60Hz, 3.1 amps.

Page 6

6