Brother BAS-326F-0, BAS-311F-L, BAS-311F-0 Using the Operation Panel, Explanation of panel

6. USING THE OPERATION PANEL

6. USING THE OPERATION PANEL

6-1. Explanation of panel

					(5)	(1)
		(7)
(2)
		(8)
(3)		(9)
		(10)
			(11)
(4)
	(6)					1207S
(1) POWER indicator	When the power is turned on, the indicator lights to show that the power is on.
(2) PROGRAM No. display	Displays the program number 00 - 99.
(3) Program select switch	Used to select the program number when reading a program from or writing a
	program to disk.
(4) Program Read/Write switch	Used to read a program from floppy disk, or to write a newly programmed stitch
	pattern to floppy disk.
	Up to ten patterns (00 - 99) can be stored on each disk.
(5) Display screen	Used to display data such as menus, errors and memory switch settings.
(6) Menu switch	Used to select the desired menu (scale, speed, bobbin thread counter, split No.).
	One of the indicators (7) - (11) illuminates to indicate the menu selected, and the
	setting for that menu them appears on the display screen (5).
	The illuminated indicator changes in the following order each time the switch is
	pressed.
	X-SCALE indicator (7)			Y-SCALE indicator (8)		SPEED indicator (9)
	B.T. COUNTER indicator (10)				SPLIT NO. indicator (11)
(7) X-SCALE indicator	Illuminates when X-scale mode has been selected using the menu switch (6).
(8) Y-SCALE indicator	Illuminates when Y-scale mode has been selected using the menu switch (6).
(9) SPEED indicator	Illuminates when speed mode has been selected using the menu switch (6).

26

BAS-311F-0, 311F-L, 326F-0