Brother BAS-326F-0 Changing the presser foot lift, Standard presser foot lift is 3 mm max mm

9. STANDARD ADJUSTMENTS

9-8. Changing the presser foot lift

<Standard presser foot lift is 3 mm (max. 8 mm). >

(3) (9)

3 - 5 mm

(8)

				(6)
(4)	(5)	(2)	(7)	0.5 - 1 mm
1252S		1253S		1254S

Adjusting presser foot lift to 3 - 5mm

1.Loosen the screw (2) and open the intermittent cover (3).

2.Loosen the nut (4) and adjust the intermittent presser connecting rod (5) position.

(When the intermittent presser connecting rod is raised, the lift will increase. When lowered, the lift will decrese.)

Adjusting presser foot lift to 5 - 8 mm

1.Turn the upper shaft to set the presser foot to its lowest point. Loosen the screw (9) of intermittent presser arm (R) (8). Adjust the clearance between the presser lifter (6) and the presser bar bush (7) to 0.5 - 1 mm.

2.Loosen the nut (4) and adjust the intermittent presser connecting rod (5) position.

(When the intermittent presser connecting rod is raised, the lift will increase. When lowered, the lift will decrese.)

(14)

(13)

(11)

(12)

(10)

1255S 1256S

If vertical movement of the presser foot is not required

1.Remove the face plate (10).

2.Remove the stud screw (11) and re-attach the intermitte connecting rod (12) to the upper screw hole (14) of the intermittent presser arm F (13).

BAS-311F-0, 311F-L, 326F-0

47