Brother BAS-311F-L, BAS-326F-0, BAS-311F-0 instruction manual DIP Switch, Panel DIP switch functions

10. DIP SWITCH

10. DIP SWITCH

Note

All DIP switches are set to OFF at the time of shipment.

When changing DIP switch, the power must be off.

10-1. Panel DIP switch functions

	1224S
DIP switch A
SW No.	When ON
A-1	After sewing is complete, the work clamp is raised by the operator and does not rise automatically.

Various setting combinations for DIP switch No. 2, No. 3 and No. 4 can be used to change the way the work clamp is raised and lowered.

For Air-type work clamps, the operation mode can be changed using the two-stage work clamp switch.

SW	SW	SW	Type	Function of work clamp pedal
A-2	A-3	A-4
-	-	-	Solenoid/	Work clamp and presser foot rise and lower simultaneously.
			Pneumatic
ON	-	-	Solenoid/	Only work clamp rises and lowers; presser foot lowers when starting
			Pneumatic	switch is pressed.
-	ON	-	Air	For split-type presser foot, the left/right order changes alternately.
ON	ON	-	Air	Only work clamp rises and lowers; presser foot lowers when starting
				switch is pressed.
-	-	ON	Air	Work clamp and presser foot rise and lower simultaneously.
ON	-	ON	Air	Lowers in the order right work clamp, left work clamp, presser foot;
				reverse order when rising.
-	ON	ON	Air	Lowers in the order left work clamp, right work clamp, presser foot;
				reverse order when rising.
ON	ON	ON	Air	Lowers in the order left and right work clamp, presser foot; reverse order
				when rising.

54

BAS-311F-0, 311F-L, 326F-0