Brother BAS-326F-0, BAS-311F-L, BAS-311F-0 If memo-0E is ON, the work clamp opens and closes twice

Page 66

11.CHANGING SPECIAL FUNCTION AND USING THE MEMORY SWITCHES Memory switches (00 - 0F)

Switch No.

 

 

When ON

 

 

 

 

 

memo-00

When moving to the home position, the feed plate moves in the order X

Y and the start position

moves in the order Y

X.

 

 

 

 

 

memo-01

When moving to the home position, the feed plate moves in the order Y

X and the start position

moves in the order X

Y.

 

 

 

 

 

 

The forward position becomes the home position, and movement is in the order Y

X and

memo-02

X

Y.

 

 

 

 

Use when there is an obstacle at the center of the work clamp.

 

 

memo-03

Eject device operates. (Eject device is available by special order.)

 

 

 

 

memo-04

Needle stops in up position during emergency stop. (Needle normally stops in down position.)

 

 

memo-05

When sewing is finished, the feed plate moves via the machine home position to the start position.

 

 

memo-06

After the final stitch, the work clamp rises and then the feed plate returns to the start position.

 

 

 

 

memo-07

Intermittent work clamp is not used (does not rise).

 

 

 

 

memo-08

When using an inner clamping device, the clamping presser is ON for 1/4 and OFF for 3/4 of the

pattern. (Inner clamping device is available as an option.)

 

 

 

 

 

memo-09

Changes the wiper to air drive. (Air wiper is availabe as an option.)

 

 

 

 

 

 

memo-0A

Jog feeding becomes faster during programming.

 

 

 

 

memo-0b

ON when a two-stage tensioner is used. (Two-stage tensioner is available as an option.)

 

 

memo-0c

Single-pedal operation by means of two-stage work clamp switches. DIP switch A-2 is ON

 

 

memo-0d

Clearing the emergency stop switch action is carried out using the STEP BACK switch.

Note: The factory default setting is ON, and it changes to ON when all memory settings are

 

 

cleared.

 

 

 

memo-0E

Test feeding is carried out at the same speed as normal sewing. (For checking feed operation)

 

 

memo-0F

After sewing is finished, the work clamp automatically opens and closes once. (practice operation)

If memo-0E is ON, the work clamp opens and closes twice.

 

 

 

 

 

BAS-311F-0, 311F-L, 326F-0

59

Page 65 Page 67
Image 66
Page 65 Page 67
Contents BAS-326F-0 Safety Instructions Safety indications and their meaningsInstallation Environmental requirementsCleaning SewingMaintenace and inspection Direction of operation Frame side cover Contents Changing Special Functions Name of Major Parts Specifications BAS-311F-L *3 a BAS-326F-0 *4 aInstallation Table processing diagram PositioningInstalling the control box Installing the rubber cushions Installing the oil panInstalling the cushions Installing the switching plateInstalling the machine head Tilting the sewing machine head 1170S Connecting the ground wire Connecting the cords Installing the operation panelBAS-311F-0 Solenoid type only ORG Installing the belt cover Installing the foot switchInstalling the spool stand Installing the eye guard Installing the programmer option Installing the feed base cover supports BAS-311F-L, 326F-0 Installing the X feed base cover BAS-311F-L, 326F-0Connecting the tubes pneumatic type only When installing to the underside of the work table When installing to a beamLubrication Lubrication pointsBAS-326F-0 Installing the needle Correct OperationSelecting the needle and thread Threading the upper thread Winding the lower thread Replacing the bobbin case and threading the thread Sewing conditions and thread tensionLower thread tension Using the Operation Panel Explanation of panel110 Using the floppy disk Compatible types of floppy diskSetting the floppy disk How to use the cleaning diskClearing the error Using the program R/W Read/Write switchIf an error message is displayed To Read a pattern to memoryUsing the Test switch Checking the sewing pattern Resuming operation from a stopping poingUsing the emergency stop switch Continuing sewing from a stopping pointAdjusting the sewing Speed control Changing the X-SCALE and Y-SCALE settingsUsing the bobbin thread counter Using production counter Using single split mode Shifting a stitch pattern Sewing Before starting sewingSewing operation 1230S Lubrication Cleaning and InspectionCleaning the rotary hook Draining the oilCleaning the eye guard Cleaning the control box air inlet portCleaning the air holes of belt cover and frame side cover Checking the needleStandard Adjustments Adjusting the needle bar heightAdjusting the needle bar lift amount Adjusting the needle clearance Adjusting the driver needle guardAdjusting the shuttle race thread guide Adjusting the movable knife Replacing the movable and fixed knives AbcdAdjusting the presser foot Changing the presser foot lift Adjusting presser foot lift to 3 5mmAdjusting presser foot lift to 5 8 mm Standard presser foot lift is 3 mm max mmAdjusting the wiper For vertical wiper standardAdjusting the two-step work clamp lift amount BAS-311F-0 Solenoid typeBAS-326F-0 Adjusting the needle up stop position Checking the input sensor and DIP switch input Clearing all memory settings Checking the input voltageDIP Switch Panel DIP switch functionsDipswitch BAS-311F-L onlyDIP switches inside the control box DIP Switch CDipswitch Changing Special Functions and Using the Memory Switches If memo-0E is ON, the work clamp opens and closes twice Switch No When on Memo-10 Main circuit board instead of the voltage Switch No Possible Units Error Codes Can not backup data. Control PCB Turn off power and check connector P20 Gauge Parts List According to Subclasses Bobbin case assy S59221-001 LC Troubleshooting Incorrect needle and rotary hook timing Adjust the needle bar lift Amount Adjust the position Head position switch cord connection Options WP stitch device Automatic bobbin changerPlay prevention work clamp 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan. Phone
Top Page Image Contents