Brother BAS-311F-0, BAS-326F-0, BAS-311F-L Using the floppy disk, Compatible types of floppy disk

6. USING THE OPERATION PANEL

6-2. Using the floppy disk

<Compatible types of floppy disk>

Data type	No. of stitches			Data resolution	Disk	Format	Write
	programmed						enabled
	20,000	stitches	per
300E type	pattern	100 pattern		0.05 mm/pulse			Yes
(300F type)	Up to a maxi-mum				2HD	1.44 MB
	of 360,000 stitches
Tajima embroidery data	50,000 stitches per pattern			0.1 mm/pulse			No
	4,000	stitches	per
Old 300A type	pattern 10 patterns			0.1 mm/pulse			Yes
	Up to a maximum of
	40,000 stitches				2DD	Automatically
	2,000	stitches	per			formatted
Old 300 data	pattern 10 patterns			0.2 mm/pulse			No
	Up to a maximum of
	20,000 stitches

The above four types of data can all be read, but when writing to disk, all data is automatically converted to 300F, 300E data when writing to 2HD disks and 300A data when writing to 2DD disks.

When using a 2HD disk, use a disk which has been pre-formatted as a 1.44 MB disk. (The programmer can be used to format these disks. Refer to the programmer instruction manual for details.)

TFD embroidery data can be embroidered after it has been converted by the programmer to BAS-300F and BAS- 300E data.

Restriction on using 2DD floppy disks.

In order to maintain compatibility with the old 300A series, the following restrictions have been placed on the use of the new functions which have been added to the E series.

Restricted function	A series (2DD)	F, E series (2HD)	Applicable
			command
Resolution	0.1 mm/pulse	0.05 mm/pulse
Low-speed conversion	2 types	4 types (400, 600, 800and	[668] L
	(400 and 1,200 revolutions)	1,200 revolutions)	[669] L
Split function	Not available	Available	[220] L
during embroidering			[230] L
Needle down stop for split	Not available	Available	[221] L
			[231] L
Expansion option output	Not available	Available

28

BAS-311F-0, 311F-L, 326F-0