Installation Requirements, Tools and Parts

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Connect anti-tip bracket to wall behind range.

Reconnect the anti-tip bracket, if the range is moved.

Failure to follow these instructions can result in death or serious burns to children and adults.

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

■	Burner heads and caps
■	Grill grate (on grill models)

Tools needed

■Tape measure

■#2 Phillips screwdriver

■¹⁄₈" x 4¼" flat-blade screwdriver

■Level

■Drill

■Wrench or pliers

■Pipe wrench

■Adjustable wrench or ⁵⁄₈" wrench

■³⁄₈" drive ratchet

■¹⁄₈" drill bit

■¹⁵⁄₁₆" combination wrench

■¹⁄₄", ³⁄₈", ⁵⁄₁₆" nut drivers

■³⁄₁₆" carbide tip masonry bit

■Marker or pencil

■Pipe-joint compound resistant to LP gas

■Noncorrosive leak-detection solution

■Tubing cutter

For LP/Natural Gas

Conversions

■T15 Torx®† screwdriver

■⁷⁄₈" socket

■Adjustable wrench

■½" deep-well socket

■7 mm nut driver

■Masking tape

■ Wave tray (on grill models)
■ Flame spreader (on grill models)
■ Burner assembly (on grill models)
■ Grease trays (2) (on grill models)
■ Griddle drip tray (on griddle models)
■ Grill drip tray (on grill models)
■	Island trim
■ LP orifice package (W10221288)
■	Conversion label (W10221320)

NOTE: The cooktop is manufactured for use with Natural gas. To convert to LP gas, see the “Gas Conversions” section.

Additional Parts Supplied on Steam-Assist Models

■Model W10049700 water filter kit

■¼" to ¼" water supply union

Parts needed

■ Power supply cord kit:

■ 30" (76.2 cm) and 36" (91.4 cm) models - A UL listed

Parts supplied

Check that all parts are included.

■Anti-tip bracket kit

A.Anti-tip bracket

B.#8-18 x 1" Phillips head screws (4)

NOTE: Anti-tip bracket must be securely mounted to subfloor. Thickness of flooring may require longer screws to anchor bracket to subfloor. Longer screws are available from your local hardware store. See “Install Anti-Tip Bracket” section.

■Gas pressure regulator

■Burner grates

†®TORX is a registered trademark of Acument Intellectual Properties, LLC.

40 amp power supply cord kit

■ 48" (121.9 cm) models - A UL listed 50 amp power supply

cord kit marked for use with nominal 1³⁄₈" (34.93 mm)

diameter connection openings

■ A UL listed strain relief

■ UL listed wire connectors

■ All models must be installed with a backguard if installing at

zero clearance to a combustible backwall. See “Cabinet

Dimensions” in the “Location Requirements” section for

installation requirements.

■ 30" (76.2 cm) Adjustable Backguard

Order Part Number 8285148

■ 36" (91.4 cm) Adjustable Backguard

Order Part Number 8284756

■ 48" (121.9 cm) Adjustable Backguard

Order Part Number 8284755

■ 9" (22.9 cm) Backguard for 30" (76.2 cm) Ranges

Order Part Number W10115773

■ 9" (22.9 cm) Backguard for 36" (91.4 cm) Ranges

Order Part Number W10115776

■ 9" (22.9 cm) Backguard for 48" (121.9 cm) Ranges

Order Part Number W10115777