OVEN RACKS
Cleaning Method:
■
See “CustomClean™
■
Oven Lights
The oven lights are
To Replace:
Before replacing the bulb, make sure the oven is off and cool.
1.Disconnect power.
2.Remove glass light cover by grasping the front edge and pulling away from oven.
3.Remove bulb from socket.
4.Replace bulb, using tissue or wearing cotton gloves to handle bulb. To avoid damage or decreasing the life of the new bulb, do not touch bulb with bare fingers.
5.Replace bulb cover by snapping back into wall.
6.Reconnect power.
Oven Door
WARNING
Excessive Weight Hazard
Use two or more people to move and install oven doors.
Failure to do so can result in back or other injury.
IMPORTANT:
To avoid oven door glass breakage:
■Do not close the oven door if the racks are not fully inserted into the oven cavity or when bakeware extends past the front edge of an oven rack.
■Do not set objects on the glass surface of the oven door.
■Do not hit glass surfaces with bakeware or other objects.
■Do not wipe down glass surfaces until the oven has completely cooled.
For normal oven use, it is not suggested to remove the oven door. However, if removal is necessary, make sure the oven is off and cool. Then, follow these instructions. The oven door is heavy.
To Remove:
1.Open oven door to the fully open position
2.Locate the oven door latches in both corners of the oven door and rotate the latches forward to the unlocked position.
A | B |
A. Oven door latch in locked | B. Oven door latch in unlocked |
position | position |
3.Grasp the edges of the oven door with both hands and close the oven door until it will no longer close. Lift and pull oven door toward you and remove.
4.Set the oven door(s) aside on a covered work surface.
To Replace:
1.Insert both hanger arms into the door.
2.Open the oven door.
You should hear a “click” as the door is set into place.
3.Move the latches back to the locked position. Check that the door is free to open and close. If it is not, repeat the removal and installation procedures.
31