Haier DW-7777-01 Connect dishwasher, Electrical connection, Helpful Tip, If you are, Use steps

English

HELPFUL TIP: Built-up floors.

Tilt dishwasher backward to move into opening. Once in position, support front of dishwasher by lowering or shimming front feet.

18. Remove cardboard from under dishwasher.

HELPFUL TIP:

It is okay if dishwasher fits tightly into cabinet opening. Do not remove

insulation blanket- it reduces the sound level.

19.Align front of dishwasher door panel “Y” with cabinet doors “Z”. You may need to adjust alignment to for the appropriate appearance.

YZ

HELPFUL TIP:

Prop up one side of frame to hold dishwasher up

off floor when adjusting front legs.

20. Check that leveling legs “AA” are firmly

against the floor. Close and latch the door,
and place level against the front panel “BB”.
Check that dishwasher is plumb. Adjust	AA

leveling legs or add shims under rear wheels until dishwasher is level. Note: Shims must

be securely attached to floor to prevent their movement when the dishwasher is operated. Repeat for other side of dishwasher. Place level against top front opening of tub “CC”. Check that dishwasher is level from side to side. If dishwasher is not level, adjust front legs up or down until dishwasher is level.

Connect dishwasher

Electrical connection

Check electrical requirements (see page 8). You must:

•Have the correct electrical supply and recommended grounding method.

•Check that power supply is disconnected.

If you are:	Use steps:
direct wiring	1-4
using a power supply cord	1a

19

BB

CC