Changing Preprogrammed Food Pads
Preprogrammed food pads cook specified amounts of food to serving temperature (see page 10). To reprogram pads:
1.Press STOP/RESET to clear display.
2.Press MEMORY SET. "P" displays.
3.Press pad number
4.Press TIME ENTRY. "0" displays.
5.Enter new heating time. New time appears in display.
Note: When reprogramming one of the multiple program pads (MINIMEAL, SOUP, POTATO, or HOT DRINK) enter cooking time for one serving. Oven calculates time for cooking multiple servings.
6.To cook on a power level other than full power, press COOKMATIC LEVEL. "COOK LEVEL" displays.
7.Enter desired Cookmatic power level.
8.Press MEMORY SET to lock new instructions into preprogrammed pad. "P" displays. Note: If cooking time and/or Cookmatic power level is changed on multiple program pad, the change is for one serving. Oven calculates change for multiple servings. For example, if time is changed to cook one potato from 3:30 to 3:00, oven calculates time to cook eight potatoes.
9.To change other preprogrammed pads, return to step 3.
10.To exit this mode, press STOP/RESET. Time of day displays.
Lockout and Custom Lock
Use to prevent accidental programming or starting of oven. Lockout disables all key pads. Custom lock disables all key pads except one preprogrammed pad. For example, to access only the popcorn pad, the custom lock feature would disable the other pads from operating, allowing only the popcorn pad to operate.
Programming Lockout:
1.Press LOCK. "0" displays.
2.Press 1,3,5,7.
3.Press LOCK. "LOC" displays, then time of day and "L" (indicating lockout is on) display. If a pad is pressed while in lockout mode "LOC" displays for a second.
Removing Lockout Programming:
1.Press LOCK. "0" displays.
2.Enter 1,3,5,7.
3.Press LOCK. Time of day displays.
Programming Custom Lock:
1.Press LOCK. "0" displays.
2.Press 2,4,6,8.
3.Press preprogrammed pad to be left on (not locked off). For example, to access the popcorn pad or pad 9 only, press 9. "9" displays.
4.Press LOCK. "LOC" displays, then time of day, pad number programmed in step 3 ("9" from example), and "READY" display indicating pad 9 is ready for use. If pad other than accessible pad is pressed, "LOC" displays for a second.
Removing Custom Lock Programming:
1.Press LOCK. "0" displays.
2.Press 2,4,6,8. "READY" displays.
3.Press LOCK. Time of day displays.
1 6