Before Calling for Service
If microwave oven does not operate:
•Confirm unit is plugged into dedicated circuit.
•Confirm unit is on grounded and polarized circuit.
•Check fuse or circuit breaker. Determine if circuit is operable by plugging another item in outlet.
•Confirm microwave oven door is securely closed.
•If condition remains unchanged, see "Unchanged Condition" instructions below.
If control will not accept instructions:
•For cooking by time, see "Unchanged Condition" instructions below.
If readout appears wrong:
•Press STOP/RESET.
•See "Unchanged Condition" instructions below.
Unchanged Condition
If condition remains unchanged, perform the following steps:
1.Check to see if fuse or circuit breaker is open.
2.Unplug oven.
3.Reconnect oven to wall outlet. Dash lines appear in display.
4.Press STOP/RESET or set clock.
If oven light does not work:
•Confirm light bulb is screwed in tightly.
•Confirm light bulb is not defective.
If room lights dim or pulse when oven is in use:
•Confirm microwave is on proper circuit. See grounding instructions on page 6.
If unit operates, but will not heat food:
•Place one cup cool water in unit. Heat for one minute. If water temperature does not rise, unit is operating incorrectly.
If dash lines appear in display:
•This is a power interruption signal and will appear whenever oven is initially plugged in or when power is interrupted. Set the clock to clear.
WARNING
To avoid electrical shock which can cause severe personal injury or death, do not remove outer case at any time. Only authorized servicer should remove outer case.
5 7