Whirlpool W10665256D For Models MGS8880D, WEG730H0D, and WEG760H0D, For Model JGS1450D

4.Remove cooktop burner caps and bases from package containing parts. Place the burner bases as indicated by the following illustration for your model:

For Models MGS8880D, WEG730H0D, and WEG760H0D:

AD

C

B		E
A. Small	C. Medium	D. Medium
B. Large		E. Large

For Models KSGG700E and KSGB900E:

AD

C

B		E
A. Small	C. Medium	D. Medium
B. X-Large		E. Large

For Model JGS1450D:

AD

	C
B		E
A. Small	C. Oval	D. Medium
B. X-Large		E. Large

5.Align the gas tube opening in the burner base with the orifice holder on the cooktop and the igniter electrode with the notch in the burner base.

	A
	B
	C
E
	D
A. Burner cap	D. Igniter electrode
B. Gas tube opening	E. Orifice holder
C. Burner base

6.Place the burner caps on the appropriate burner bases.

IMPORTANT: The bottom of the small and medium caps are different. Do not put the wrong size burner cap on the burner base.

Small cap Medium cap Large cap X-Large cap

Burner caps should be level when properly positioned. If burner caps are not properly positioned, surface burners will not light. The burner cap should not rock or wobble when properly aligned.

A

B

A.Incorrect

B.Correct

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

7.Plug into a grounded 3 prong outlet.

12