•Why does the dishwasher not start? This could be because:
-There is no electricity supply.
-It is not plugged in properly
-The fuses have tripped
-The dishwasher is not connected to the electricity supply
-You have not pressed the On/Off button (the indicator light for this button must be continuously lit)
-The dishwasher door is not closed properly.
-The start button has not been pressed.
•The dishwasher starts but no water enters
This could be because:
-There is no water in the network.
-The stopcock is not open
-The water inlet solenoid valve filter is obstructed.
•It does not drain, water remains inside.
This could be because:
-The drainage is obstructed or badly installed.
-The drain pipe is obstructed or folded
-The filters are blocked
-The selected program has not finished, wait for it to finish.
•There are detergent remains in the dispenser or on the door This could be because:
-A dish is preventing the dispenser from opening
-The detergent is past its expiry date or is not appropriate
-The water spray arms are hitting a dish
-The water spray arm holes are covered.
-The detergent compartment was damp when the detergent was put it. The compartment must be dry.
•Unusual foam is formed:
-You have put in washing up liquid instead of dishwasher detergent.
•The dishwasher makes strange noises
This could be because:
-You have not positioned the dishes correctly.
-The water spray arms are hitting a dish