2PLUMBING IN
English
El lavavajillas está The dishwasher is equipped with a high pressure water connection pipe with a 3/4 (1.905 cm) directional internal pipe thread at normal temperature and pressure values (NPT).
In order to make its installation easier, the dishwasher includes a 3/8” (0.9525 cm) brass compression part for 3/4 NPT which adapts the pipe connector to a 3/8” compression part which incorporates the majority of the valves which close the water connection for domestic dishwashers. Alternatively, the pipe can be coupled directly to a male 3/4 brass NPT connector which is available in most hardware stores.
Adjust the direction of the pipe and the connection which comes out of the rear part of the appliance following the installation instructions.
WARNING
The hose has to pass between the wall and the bottom space at the back of the dishwasher (b1), so that it is not squashed or too rigid (b2).
Closing valve
Closing valve
b1
3/8” Comp x 3/4” BSP
Washer | Water connection pipe |
3/4" NPT
Water connection pipe
b2
5