Advanced Use | TANDBERG Director Videoconferencing System |
|
|
Advanced H.323 Settings
N O T E
THESE SETTINGS ONLY HAVE AN EFFECT IF THEY ARE SUPPORTED BY YOUR IP INFRA STRUCTURE.
RSVP (Resource Reservation Protocol)
AUTORSVP enables the endpoints to request the optimal amount of bandwidth for the duration of an IP video conference.
OFF | RSVP is switched off. |
NAT (Network Address Translation)
NAT is used in small LAN’s, often home offices, when a PC and a videoconferencing system is connected to a router with NAT support. NAT support in the videoconferencing system enables proper exchange of audio/video data when connected to an external videoconferencing system (when the IP traffic goes through an NAT router.
When NAT is ‘On’, the NAT Server Address will be shown in the
NAT Address
This must be the external/global
In the router, the following ports must be routed to the codec’s
Port
Port
Please contact your TANDBERG representative for further information.
QoS Type |
|
OFF | No QoS is used |
DIFFSERV | Diffserv QoS method is used. Please see below for details. |
IP PRECEDENCE | IP Precedence QoS method is used. Please see below for details. |
84