TANDBERG Director Videoconferencing SystemAdvanced Use
Dual Monitor
ON | Selfview, snapshots and DuoVideoTF will be displayed on the 2nd monitor. |
OFF | The 2nd monitor shows Selfview only. |
Auto-PIP
ON | Your selfview will automatically be displayed (as a |
| the camera position or video source is changed. Picking up the remote control |
| will also display your selfview. |
Welcome Menu
The Welcome menu can be shown when the system is not in use, and when
ON | The Welcome Menu is shown when the system is not in sleep mode. |
OFF | The Welcome Menu is not shown. |
LOGO | If a logo is uploaded to the system, it will be shown when this button is selected. |
| See also APPENDIX 5. |
Continuous Presence
ON | The screen is divided into three or four |
| blocks, each displaying the video image of |
| a different participant. |
OFF | The active site will be displayed in full |
| screen during a MultiSiteTF conference. Also |
| called Voice Switched mode. |
T I P
TO DISPLAY YOUR SITE IN FULL
SCREEN WHEN ‘ON’ IS SELECTED,
PRESS THE QUICK KEY ‘REQUEST
FLOOR’.
MCU status line
ON | The MultiSiteTF/MCU/DuoVideoTF indicators will be displayed and provide |
| information about the conference. |
OFF | The MultiSiteTF/MCU/DuoVideoTF indicators will not be displayed. |
AUTO | The MultiSiteTF/MCU/DuoVideoTF indicators will be displayed for a few seconds |
| and then timed out. When grabbing the remote control, the indicators will be |
| shown again. |
System Name
Identifies the system:
•during an MCU conference call.
•when using the
•when the codec is acting as an SNMP Agent.
•towards a DHCP server.
•as an H.323 ID. Other systems can call us using this name instead of
Menu Password
Enter the code which should be entered to get access to the menu system on the TANDBERG system. When pressing the MENU button on the remote control, the user will be asked to enter the Password written here.
TF - TANDBERG FIRST
59