TANDBERG D5016402 user manual Taskbar, Video Display Window

Display Operation TANDBERG Videoconferencing System

Taskbar

The grey TANDBERG TASKBAR present at the bottom of the screen provides controls relevant to local presentation operation. The buttons will change according to the display status. The button border and text will illuminate red when it is activated.

N O T E

TASKBAR REFERENCES ARE FOR

THE TANDBERG INTERFACE AND

NOT PC OPERATING SYSTEM

TASKBARS (I.E. MICROSOFT

WINDOWS, MACINTOSH)

HIDE / TASKBAR	HIDE removes the taskbar from the screen, a single Taskbar button replaces it.
	TASKBAR displays the taskbar on the bottom of the screen
EXIT	EXIT from the local display operation to the Opening screen.
ENLARGE / REDUCE	ENLARGE increases the size of the video display to full screen, thus covering the source
	selection and device controls. The taskbar will remain available.
	REDUCE returns the video display to the standard size allowing access to the source
	selection and device control.
	It is also possible to enlarge and reduce the video display by touching the video
	window itself. This function works for all video sources except the PC source
VIDEOCONFERENCE	Select this function to access the VIDEOCONFERENCE CALL CONTROLS and initiate a call.
VOLUME	Increases or decreases the local volume level within the room by using the plus or
	minus buttons. The level bar indicates the current level setting.

Video Display Window

Shows the currently selected VIDEO SOURCE.

It is possible to enlarge certain video display windows by touching the video window itself.

The PC source is configured for on-screen annotation, therefore the ENLARGE/REDUCE buttons must be used in this case.

Touching the window again will return it to the previous size.

44