DCS RGY/RGV, RGUC/RGVC, RDU/RDV manual Using the grill, To use the grill

Page 28

US CA

26

Cooktop use

Using the grill

The grill has a reversible grate. It will change color with use as oils cook onto the surface. This is normal and doesn’t affect grilling performance.

Ridged side

Flat side

For foods where you

For foods that need

want the fat to run

more support and don’t

down, such as:

contain a lot of fat,

Hamburger patties

such as:

Steak

Fish

Sausages

Vegetables

 

Lean chicken pieces

To use the grill

1Remove the cover and check that the grease drip-pan and the grill grate are properly in place and you have the best side for your food. The grate should always be sloping towards the grease drip-pan, with its support bar firmly resting in the groove of the rear ledge, as shown.

Important!

Never turn on or use the grill with the grill cover in place.

CORRECT

 

 

 

 

Support

Rear

 

Ledge

 

Grill grate

bar

 

Grease drip-pan

Radiant tray

 

 

WRONG

 

 

 

 

 

 

Rear

 

Grill grate

Support

Ledge

 

bar

 

Grease drip-pan

Radiant tray

 

2Turn the grill knob counterclockwise to the LITE/HI setting.

The halo around the knob will glow red.

There may be a delay of a minute or so before the grill burner lights. This is normal.

3Allow the empty grill to preheat for about 15 minutes.

4Adjust the heat anywhere between HI (high) and LO (low) during grilling.

5When you have finished using the grill, turn the grill knob clockwise back to OFF.

6 Clean the grill grate immediately after use. See ‘Care and cleaning’ for instructions.

7 When the grill has cooled down, clean the grease drip-pan. See ‘Care and cleaning’ for instructions.

Page 27 Page 29
Image 28
Page 27 Page 29
Contents User guide Guide d’utilisation What to do if YOU Smell GAS Contents Important Safety Instructions Safety and warningsImportant Safety Instructions Important Safety Instructions Important Safety Instructions Introduction ModelsRGU/RGV-364GL RGU/RGV-364GD Before you start Illustration only Conditioning the oven First useSeasoning the griddle Oven use Positioning the shelvesSecondary oven shelves Main oven shelvesTo remove the shelves To insert the shelves Main OvenWait for the oven to cool down completely To insert the shelves Secondary Oven 48 models only Guard railActivity Oven Mode Description Oven modesTypical Foods Arrangement Using your oven for baking and roasting US 16 Oven useHalo Red HaloUsing your oven for broiling Oven use 17 USHalo Orange HaloHalo Unlit UnlitUsing your oven for proofing dough US 18 Oven useRDU/RDV-48 models Halo Red Halo UnlitOven use 19 US All other modelsOven cooking guidelines BakingOven cooking guidelines Roasting BroilingProofing dough DefrostingBaking charts RDU/RDV models Main ovenRGU/RGV and RGUC/RGVC models Main oven Using the cooktop burners US 24 Cooktop useGuidelines for using the cooktop burners Cooktop useUsing the grill To use the grillGriddle cooking chart Using the griddleGrill cooking guidelines Manual cleaning chart Care and cleaningRange exterior Oven parts Dry thoroughly with microfiber clothNon-self-cleaning ovens those On the oven mode knob This will beWithout Clean on the oven mode Cooktop parts IgnitorsFront To remove stubborn, ‘baked-on’ SoilingRemoving and replacing the oven door To remove the oven doorTo replace the oven door To remove side racks Removing and replacing the side racksTo replace side racks Replacing the burner parts Replacing the oven light bulb Using the Clean cycle About the Clean cycleTo start a Clean cycle When a Clean cycle has finished Care and cleaning 41 USTo cancel a Clean cycle Troubleshooting OvenTroubleshooting 43 US Inside the oven during a Incinerated Action Clean cycleSteam coming from oven Moisture from food evaporating Ventilation air comingCooktop burners There is a power failure Some burners will notFlames do not burn all Around the burnerGriddle GrillWarranty and service Before you call for service or assistanceContact details Product detailsMise EN Garde Table des matières Consignes DE Sécurité Importantes Consignes de sécurité et mises en gardeRisque d’empoisonnement Risque de surface brûlanteConsignes DE Sécurité Importantes Consignes DE Sécurité Importantes Modèles 48 pouces Modèles 36 pouces Modèles 30 poucesAvant de commencer Grille à fentes Conditionnement du four Première utilisationAssaisonnement de la plaque de cuisson Utilisation du four Positionnement des grillesGrilles du four secondaire Grilles du four principalPour retirer les grilles Pour insérer les grilles Four PrincipalAttendez que le four soit complètement refroidi Du rayon latéral Rail de protectionButée de sûreté Modes d’utilisation du four CuissonAliments Types Agencement AI-JE Besoin DE US 64 Utilisation du four Utiliser votre four pour cuire et rôtirHalo Rouge HaloHalo Éteint éteintUtilisation du four 65 US Utiliser votre four pour grillerModèles RDU/RDV-48 Halo Rouge US 66 Utilisation du fourHalo Éteint Utiliser votre four pour la fermentation de la pâte Utilisation du four 67 USTous les autres modèles Directives de cuisson au four CuissonDirectives de cuisson au four Rôti Cuisson au grilFermentation de la pâte DécongelerModèles RDU/RDV four principal Tableaux de cuissonModèles RGU/RGV et RGUC/RGVC four principal US 72 Utiliser la table de cuisson Utilisation des brûleursUtiliser la table de cuisson Directives d’utilisation des brûleursUtilisation du gril de cuisson Pour utiliser le gril de cuissonDirectives de cuisson sur le gril de cuisson Utilisation de la plaque de cuissonTableau de cuisson sur la plaque Tableau de nettoyage manuel Entretien et nettoyageExtérieur de la cuisinière Pièces du four Séchez à fond avec un chiffon en microfibresPièces du four Pièces de la table de cuisson AllumeursAvant Cadre noir du gril 1 et de la plaque de cuisson Retrait et remplacement de la porte du four Pour retirer la porte du fourPour replacer la porte du four Pour retirer les rayons latéraux Retrait et remplacement des rayons latérauxPour replacer les rayons latéraux Remplacement des pièces du brûleur Remplacement de l’ampoule du four Utilisation du cycle de nettoyage Propos du cycle de nettoyageUS 88 Entretien et nettoyage Pour démarrer un cycle de nettoyageLorsqu’un cycle de nettoyage est terminé Entretien et nettoyage 89 USPour annuler un cycle de nettoyage Dépistage des pannes FourDe la vapeur s’échappe Des évents d’aérationDu four à l’arrière de la CuisinièreBrûleur de la table de cuisson Certains brûleurs ne ’allument pasLes flammes ne font pas Le tour du capuchon dePlaque de cuisson Poignée du grilDétails de contact Garantie et réparationInformations sur le produit Page Page US CA

RDU/RDV, RGY/RGV, RGUC/RGVC specifications

DCS RGUC/RGVC, RGY/RGV, RDU/RDV refer to a range of advanced communication and control systems designed for various applications in automation, data transmission, and remote monitoring. These systems are particularly significant in sectors like manufacturing, energy management, and telecommunications due to their robust features and cutting-edge technologies.

One of the main features of the DCS RGUC/RGVC systems is their modular architecture. This allows for scalability and flexibility, making it easier to adapt the system to diverse operational requirements. Each module is designed to fulfill specific functions, whether it’s data acquisition, processing, or network communication. This modularity not only simplifies maintenance but also enhances the system's overall efficiency.

Another critical aspect of these systems is their use of real-time data processing technologies. By harnessing high-speed processors and advanced algorithms, the RGUC/RGVC family can handle large volumes of data almost instantaneously. This capability is essential for applications that require quick decision-making based on current operational conditions.

The communication protocols employed by the DCS RGUC/RGVC are state-of-the-art, featuring support for industry standards such as Modbus, Profibus, and Ethernet/IP. This ensures compatibility with various field devices and systems, allowing for seamless integration into existing setups. Additionally, advanced security features are integrated to protect sensitive data against unauthorized access.

Energy efficiency is another hallmark of the DCS RGUC/RGVC series. These systems are designed to minimize power consumption without sacrificing performance, which is increasingly important in today’s environmentally conscious landscape. By optimizing energy use, organizations can reduce operational costs and contribute to sustainability goals.

The RGY/RGV and RDU/RDV models are tailored for specific applications within this framework. The RGY/RGV series is often utilized in grid management and energy distribution, while the RDU/RDV models are geared towards data relay and signal processing tasks. Each model is tailored to meet the distinct demands of its respective domain, ensuring reliability and optimal performance.

In conclusion, the DCS RGUC/RGVC, RGY/RGV, and RDU/RDV systems stand out due to their modularity, real-time data processing, compatibility with various communication protocols, energy efficiency, and tailor-made applications. As industries continue to evolve towards more automated and interconnected systems, these advanced communication and control technologies play a vital role in driving efficiency and innovation.
Top Page Image Contents