Rotel RCC-1055 owner manual Playing Discs, Display Panel

Playing Discs

Play Buttons and

Press the Play Button to play the disc indicated in the Disc Display. The disc will begin play- ing with Track 1, unless another track has been selected before the Play button is pressed.

Unless one of the Repeat Play functions has been selected:

¥After the last track on discs 1 through 4 is played, the next disc is selected and play continues with track 1 of the disc.

¥At the end of disc 5 disc play stops.

See the Repeat Play section for more infor- mation.

Pause Button

Press the Pause Button to temporarily stop playing the disc. Press the Pause Button again, or the Play Button, to resume playing the disc at the same track and time.

Stop Button

Press the Stop Button to stop playing the disc. The disc will remain selected but the track selection will go back to track 1.

Track Skip Buttons

When a disc is not playing:

¥Press the button to select the next track

on the disc. Press and hold the but- ton to advance more than one track on the disc.

¥Press the button to select the previous track on the disc. Press and hold the button to go back more than one track on the disc.

When a disc is playing:

¥Press the button to skip the rest of track being played and begin playing at the beginning of the next track on the disc. Press

and hold the button to advance more than one track on the disc.

¥Press the button to return to the be- ginning of the track being played. Press

and hold the button to go back more than one track on the disc.

9

Track Selection Buttons

(remote only)

To select a specific track on a disc, press the corresponding Track Selection buttons. The selected track immediately begins playing. To select tracks higher than number 10 use the Ò>10Ó button. For example, to select track 17, press the Ò>10Ó button then the Ò7Ó button.

NOTE: When the RCC-1055 is in Pro- grammed Play mode, the Track Selection buttons are used to select tracks to be added to the program. See the Pro- grammed Disc Play section.

Search Buttons

(remote only)

Press and hold the or buttons to quickly search a disc in the forward or reverse direc- tion. For the first five seconds the search speed will be approximately four times normal play- ing speed. After three seconds the search speed will increase to approximately 20 times nor- mal playing speed. The sound volume is re- duced while the search function is being used. The search function may be used when disc play has been temporarily stopped with the Pause function, however no sound is heard. The Search function will not go past the be- ginning or end of the selected disc.

About HDCD¨

HDCD discs are encoded with a high density data stream. During playback this high den- sity data stream is decoded to a conventional digital signal. This HDCD encode/decode sys- tem greatly reduces the errors that are nor- mally generated during the analog-to-digital, and then digital-to-analog, conversions. The HDCD system is automatically activated, and

the HDCD Indicator lights, whenever an HDCD disc is played.

English

Display Panel

The Disc Indicators shows the positions in the Disc Tray that have discs in them.

The Play Indicator is lit whenever a disc is playing.

The Pause Indicator is lit when disc play has been temporarily stopped with the Pause button.

The Disc Selection Indicator typically shows the number of the disc currently selected. If the Remaining Disc Playing Time display op- tion has been selected the Disc Selection In- dicator changes to a ÒÐÓ. See the Time Dis- play section.

The Track Indicator shows either the track that is selected, the total number of tracks on the disc, or the number of tracks that remain on the disc. See the Time Button section.

One of the Repeat Play Mode Indicators will light if one of the repeat play options has been selected. See the Repeat Play Button section for more information.

The Random Play Indicator is lit when one of the random play options is being used. See the Random Play section.

The Program Play Indicator lights when- ever the track programming function is acti- vated. See the Programed Play Section.

The Intro Scan Indicator is lit when the Intro Scan feature is activated. See the Intro Scan section.

The Remaining Time Indicator lights when one of the alternative time display functions is activated. See the Time Display Section.

The Time Display shows either the total playing time of the disc that is selected, the amount of time the current track has been play- ing, the remaining playing time of the current track, or the remaining time of the disc that is playing. See the Time Button section.