Makita LT-210 Safety Instructions, General Instructions, Intended use of the machine

Page 3

SAFETY INSTRUCTIONS

General Instructions

To ensure correct operation, user has to read this instruction manual to make himself familiar with the handling of the string trimmer. Users insufficiently informed will risk danger to themselves as well as others due to improper handling.

It is recommended only to lend the string trimmer to people who have proven to be experienced with string trimmers.

Always hand over the instruction manual.

First users should ask the dealer for basic instructions to familiarize oneself with the handling of an engine powered trimmer.

Children and young persons aged under 18 years must not be allowed to operate the string trimmer. Persons over the age of 16 years may however use the device for the purpose of being trained only whilst under supervi- sion of a qualified trainer.

Use string trimmers with the utmost care and attention.

Operate the string trimmer only if you are in good physical condition. Perform all work calmly and carefully. The operator has to accept liability for others.

Never use the string trimmer after consumption of alcohol or drugs, or if feeling tired or ill.

Intended use of the machine

The String Trimmer is only intended for cutter grass, weeds, Bushes, undergrowth it should not be used for any other purpose such as Edging or hedge cutting as this may cause injury.

Personal protective equipment

The clothing worn should be functional and appropriate, i.e. it should be tight-fitting but not cause hindrance. Do not wear either jewelry or clothing which could become entangled with bushes or shrubs.

In order to avoid either head-, eye-, hand-or foot injuries as well as to protect your hearing the following protective equipment and protective clothing must be used during operation of the string trimmer.

Always wear a helmet where there is a risk of falling objects. The protec- tive helmet (1) is to be checked at regular intervals for damage and is to be replaced at the latest after 5 years. Use only the approved protective helmets.

The visor (2) of the helmet (or alternatively goggles) protects the face from flying debris and stones. During operation of the string trimmer always wear goggles, or a visor to prevent eye injuries.

Wear adequate noise protection equipment to avoid hearing impairment (ear muffs (3), ear plugs etc.).

The work overalls (4) protect against flying stones and debris. We strongly recommend that the user wears work overalls.

Special gloves (5) made of thick leather are part of the prescribed equipment and must always be worn during operation of the string trimmer.

When using the string trimmer, always wear safety shoes (6) with a non- slip sole. This protects against injuries and ensures a good footing.

Starting up the string trimmer

Please make sure that there are no children or other people within a working range of 15 meters (50ft), also pay attention to any animals in the working vicinity.

Before use always check that the string trimmer is safe for operation: Check the security of the nylon cutting head, the control lever for easy action.

Rotation of the nylon cutting head during idling speed is not allowed. Check with your dealer for adjustment if in doubt. Check for clean and dry handles and test the function of the start/stop switch.

Diagrammatic figure

15 meters

3

Image 3
Contents LT-210 English SymbolsPersonal protective equipment Safety InstructionsGeneral Instructions Intended use of the machineMeters RefuelingFirst Aid Maintenance instructionsMethod of operation Cutting ToolsModel LT-210 Technical Data LT-210Designation of Parts LT-210 String TrimmerMounting of Handle Mounting of ProtectorMounting of Nylon Cutter Head FUELS/REFUELING Points in Operation and HOW to Stop Nylon Cutting Head Checking the Idling speedOperation Page Checking the spark plug Daily checkup and maintenanceCleaning of air cleaner Servicing InstructionsSuction head in the fuel tank Cleaning of muffler exhaust portMaintenance schedule Fault locationStorage Emisson Compliance Period Obtaining Warranty Service HOW to Make a Claim Français SymbolesÉquipement personnel de protection Consignes DE SécuritéInstructions générales Utilisation spéciale de la machineMètres RavitaillementPremier secour Instructions de maintenanceMéthode d’utilisation Tête de coupe à fillCaracteristiques Techniques LT-210 Nomenclature DES Pièces LT-210 Taille-borduresMontage DE LA Poignée Montage DU Dispositif DE ProtectionMontage DE LA Tête DE Coupe À FIL CARBURANTS/RAVITAILLEMENT Consignes de sécurité lors du fonctionnement Consignes DE Mise EN Marche ET Arrêt DE LA MachineDémarrage Démarrage à froidTête DE Coupe À FIL EN Nylon Contrôle de la vitesse de ralentiFonctionnement Remplacement du fil en nylon Contôle de la bougie d’allumage Contrôle et opérations de maintenance réguliersInstructions Relatives AUX Réparations Nettoyage du filtre à airNettoyage de l’orifice du pot d’échappement Tête d’aspiration dans le réservoir de carburantPlan de maintenance RemisageLocalisation des défauts Lista de contenidos Página SimbolosEquipo Personal de Protección Instrucciones DE SeguridadInstrucciones generales Uso recomendado de la máquinaReabastecimiento Primeros Auxilios Método de trabajoHerramientas de Corte Instrucciones de mantenimientoDatos Técnicos LT-210 LT-210 Cortabordes Denominación DE PartesPara máquinas con manillar en bucle Montaje DEL ManillarMontaje DEL Protector Montaje DE LA Cabezal DE Corte DE NylonCOMBUSTIBLES/REABASTECIMIENTO Puntos Relacionados CON EL Manejo Y LA Parada ArranqueArranque en frio Operación Cabezal DE NylonSustitución del cabezal de Nylon Comprobación y mantenimiento diarios Instrucciones DE ServicioPage Almacenamiento Dolmar GmbH Postfach 70 04 Hamburg Germany 6169512100 05.07