Makita LT-210 Method of operation, Cutting Tools, Maintenance instructions, First Aid, Packaging

Page 5

Method of operation

Only use the string trimmer in good lighting and visibility. During the winter season beware of slippery or wet areas, ice and snow (risk of slipping). Always ensure a safe footing.

Never cut above the waist height.

Never stand on a ladder and run the string trimmer.

Never climb up trees to perform cutting operation with the string trimmer.

Never work on unstable surfaces.

Remove sand, stones, nails etc. found within the working range. Foreign particles may damage the nylon cutting head and can cause dangerous kick-backs.

Before commencing cutting, the nylon cutting head must have reached full working speed.

Cutting Tools

Employ only the correct nylon cutting head for the job in hand.

For cutting thick materials, such as weed, high grass, bushes, shrubs, underwood, thicket etc. (max. 2 cm dia. thickness). Perform this cutting work by swinging the string trimmer evenly in half-circles from right to left (similar to using a scythe).

Maintenance instructions

The condition of the trimmer also of the shoulder strap must be checked before commencing work.

Turn off the engine and remove the spark plug connector when replacing, and also when cleaning the nylon cutting head.

Operate the string trimmer with as little noise and contamination as possible. In particular, check the correct setting of the carburetor.

Clean the string trimmer at regular intervals and check that all screws and nuts are well tightened.

Never service or store the string trimmer in the vicinity of naked flames.

Always store the string trimmer in locked rooms and with an emptied fuel tank.

Observe the relevant accident prevention instructions issued by the relevant trade associations and by the insurance companies.

Do not perform any modifications on the string trimmer as this will endanger your safety.

The performance of maintenance or repair work by the user is limited to those activities as described in the instruction manual. All the other work is to be done by an Authorized Service Agent. Use only genuine spare parts and accessories released and supplied by DOLMAR.

Use of non-approved accessories and tools means increased risk of accidents.

DOLMAR will not accept any liability for accidents or damage caused by the use of non-approved nylon cutting heads and fixing devices of nylon cutting heads, or accessories.

First Aid

In case of accident, make sure that a first-aid box is available in the vicinity of the cutting operations. Immediately replace any item taken from the first aid box.

When asking for help, please give the following information:

Place of accident

What happened

Number of injured persons

Kind of injuries

Your name

Packaging

The DOLMAR String trimmer will be delivered in two protective cardboard boxes to prevent transport damage. Cardboard is a basic raw material and is therefore consequently reusable or suitable for recycling (waste paper recycling).

5

Image 5
Contents LT-210 English SymbolsGeneral Instructions Safety InstructionsIntended use of the machine Personal protective equipmentMeters RefuelingMethod of operation Maintenance instructionsCutting Tools First AidModel LT-210 Technical Data LT-210Designation of Parts LT-210 String TrimmerMounting of Nylon Cutter Head Mounting of HandleMounting of Protector FUELS/REFUELING Points in Operation and HOW to Stop Operation Nylon Cutting HeadChecking the Idling speed Page Cleaning of air cleaner Daily checkup and maintenanceServicing Instructions Checking the spark plugSuction head in the fuel tank Cleaning of muffler exhaust portStorage Maintenance scheduleFault location Emisson Compliance Period Obtaining Warranty Service HOW to Make a Claim Français SymbolesInstructions générales Consignes DE SécuritéUtilisation spéciale de la machine Équipement personnel de protectionMètres RavitaillementMéthode d’utilisation Instructions de maintenanceTête de coupe à fill Premier secourCaracteristiques Techniques LT-210 Nomenclature DES Pièces LT-210 Taille-borduresMontage DE LA Tête DE Coupe À FIL Montage DE LA PoignéeMontage DU Dispositif DE Protection CARBURANTS/RAVITAILLEMENT Démarrage Consignes DE Mise EN Marche ET Arrêt DE LA MachineDémarrage à froid Consignes de sécurité lors du fonctionnementFonctionnement Tête DE Coupe À FIL EN NylonContrôle de la vitesse de ralenti Remplacement du fil en nylon Instructions Relatives AUX Réparations Contrôle et opérations de maintenance réguliersNettoyage du filtre à air Contôle de la bougie d’allumageNettoyage de l’orifice du pot d’échappement Tête d’aspiration dans le réservoir de carburantLocalisation des défauts Plan de maintenanceRemisage Lista de contenidos Página SimbolosInstrucciones generales Instrucciones DE SeguridadUso recomendado de la máquina Equipo Personal de ProtecciónReabastecimiento Herramientas de Corte Método de trabajoInstrucciones de mantenimiento Primeros AuxiliosDatos Técnicos LT-210 LT-210 Cortabordes Denominación DE PartesMontaje DEL Protector Montaje DEL ManillarMontaje DE LA Cabezal DE Corte DE Nylon Para máquinas con manillar en bucleCOMBUSTIBLES/REABASTECIMIENTO Arranque en frio Puntos Relacionados CON EL Manejo Y LA ParadaArranque Operación Cabezal DE NylonSustitución del cabezal de Nylon Comprobación y mantenimiento diarios Instrucciones DE ServicioPage Almacenamiento Dolmar GmbH Postfach 70 04 Hamburg Germany 6169512100 05.07