maintenance
spark arrestor
The spark arrestor must be cleaned or replaced every 50 hours or yearly to ensure proper performance of your product. Spark arrestors may be in different locations depending on the model purchased. Please contact your nearest service dealer for the location of the spark arrestor for your model.
draining fuel tank/carburetor
See Figures 18 - 19.
To help prevent gum deposits in the fuel system, drain the fuel from the tank and carburetor before storing.
Draining the fuel tank
Turn the engine switch off ( O ).
Turn the fuel valve to the OFF position.
Remove the fuel line from the petcock by squeezing the ends of the retaining clip and sliding the fuel line off.
Install one end of a drain line over the petcock, and place the other end in a fuel container large enough to catch the fuel being drained from the tank.
Turn the fuel valve to the ON position.
When the fuel has drained from the tank, close the fuel valve and reinstall fuel line on petcock.
draining the carburetor
Turn the engine switch off ( O ).
Turn the fuel valve to the OFF position.
Position a suitable container under the carburetor drain screw to catch fuel; loosen the screw.
Allow fuel to drain completely into container.
Retighten drain screw.
NOTE: Consult hazardous waste management guidelines in your area for the proper way to dispose of used fuel.
Transporting
Turn engine switch OFF ( O ).
Turn the fuel valve to the OFF position.
Make sure engine and exhaust of unit is cool.
Empty the fuel tank.
Do not drop or strike unit or place under heavy objects.