■If the IP router is connected to xDSL modem, select ‘PPPoE’ in Setup ➞ Basic Setup as figure and enter the User Name and Password to access the ISP (Internet Service Provider).
■If the IP router is connected to the Cable modem, select ‘Automatic
■After finishing the setting, click the ‘Save settings’ button and save the setting.
■Check the ‘Status’ page to verify that xDSL or Cable modem is connected successfully.
E
If not, click the ‘Connect’ button to retry, or recheck the setting value and retry.
If xDSL or Cable modem is connected successfully, IP, Subnet Mask, Gateway from ISP will be indicated.
■Execute IPinstaller.exe program in the user’s Local PC to set the