Samsung SCC-C6475P manual 21

■Accessing SCC-C6475(P) by using the internet browser, Log In page as follow appears.

-User ID to Log In is set to a basic value ‘root’ when it was shipped and the password is ‘4321’.

■Log in at SCC-C6475(P) and the main screen that user can see images appears.

■After checking if the camera image works well, click the setup mode button in the right up side of the main screen.

■Move the SCC-C6475(P) setup mode to the Basic Configuration ➞ IP page.

E

■Check if the setting value that user has entered the setting value by using the IP Installer program in the IP Configuration item is saved safely.

-DNS Server setting is assigned as the basic value '168.126.63.1'. User can change the setting value when needed.

■Assign IP Type as ‘Static IP’ in the Connection Configuration, and assign Connection Type as 'IP Router + LAN'.

-In case that the Connection Configuration is not set for the user’s network environment, the access cannot be done or the image cannot be appeared smoothly.

■Set RTSP Control port, TCP Streaming port, UDP Streaming port, and Upload port. Each port is the access port that SCC-C6475(P) network program is using, in case that several SCC-C6475(P) is connected to one IP router, SCC-C6475(P) port should be set differently.

●RTSP Control port: Port to control the image sending. The basic value is set 554(TCP).

●TCP Streaming port: Port to send the image by using the TCP process. The basic value is set 555 (TCP).

●UDP Streaming port : Port to send the image by using the UDP process. The basic value is set 8000~8009(UCP).

●Upload port: Port to upgrade S/W. The basic value is set 556(TCP).

3-13 3-14